3 second delay (only) for the same signal/sensor?
Posted: 13 Aug 2019, 18:00
Hi,
I am using rflink adapter for iobroker.
With a window sensor like this
,
which is recognized as "EV1527", I track opening/closing of a door.
This seemed to work quite reliable, but sometimes rflink just missed a state (change).
After a little investigation the cause was found - my wife.
She just rushes too fast out of the door, so the time between the opening and the closing signal (which both are the same) is too short.
Tried to messure it, there needs to be a delay of about 3 seconds to work.
I noticed with my different temperature sensor, that they sometimes get logged, even if they submit their data within a second or so.
So I thought, maybe its related to this "EV1527" kind of sensor.
As I have more of them (on windows), I tried to get signals from the door and another, very shortky after each other.
And to my suprise (again within about a second) this seems to be no problem for rflink, it receives and acts on both signals.
So, my theory, the delay only happens with the exact same sensor and not just if a signal comes from the same type of sensor.
Could this be?
Is this maybe some safty mechanism to prevent rflink from a false "double recognition"?
If this is known and wanted, is there a way arround it, maybe have this delay settable?
Would be great, if someone enlightend me. =)
Thanks.
CU,
padrino
I am using rflink adapter for iobroker.
With a window sensor like this
,
which is recognized as "EV1527", I track opening/closing of a door.
This seemed to work quite reliable, but sometimes rflink just missed a state (change).
After a little investigation the cause was found - my wife.
She just rushes too fast out of the door, so the time between the opening and the closing signal (which both are the same) is too short.
Tried to messure it, there needs to be a delay of about 3 seconds to work.
I noticed with my different temperature sensor, that they sometimes get logged, even if they submit their data within a second or so.
So I thought, maybe its related to this "EV1527" kind of sensor.
As I have more of them (on windows), I tried to get signals from the door and another, very shortky after each other.
And to my suprise (again within about a second) this seems to be no problem for rflink, it receives and acts on both signals.
So, my theory, the delay only happens with the exact same sensor and not just if a signal comes from the same type of sensor.
Could this be?
Is this maybe some safty mechanism to prevent rflink from a false "double recognition"?
If this is known and wanted, is there a way arround it, maybe have this delay settable?
Would be great, if someone enlightend me. =)
Thanks.
CU,
padrino