Page 1 of 1

RF doorbell, not recognised at all

Posted: 02 Oct 2019, 18:08
by csmale
Hi,
I bought a 433MHz doorbell at Action. RFLink receives the signal but doesn't recognise or decode it. Using rfdebug mode I captured a couple of samples:

Code: Select all

20;D2;DEBUG;Pulses=511;Pulses(uSec)=420,3750,390,840,390,840,390,840,390,840,390,840,390,1830,390,1830,390,840,390,1830,390,840,390,1830,390,840,390,840,390,840,390,840,390,840,390,1830,390,840,390,1830,390,1830,390,1830,390,840,390,840,390,1830,390,1830,390,1830,390,1830,390,1830,390,840,390,840,390,1830,390,1830,390,1830,390,840,390,1830,390,840,390,3750,390,840,390,840,390,840,390,840,390,840,390,1830,390,1830,390,840,390,1830,390,840,390,1830,390,840,390,840,390,840,390,840,390,840,390,1830,390,840,390,1830,390,1830,390,1830,390,840,390,840,390,1830,390,1830,390,1830,390,1830,390,1830,390,840,390,840,390,1830,390,1830,390,1830,390,840,390,1830,390,840,390,3750,390,840,390,840,390,840,390,840,390,840,390,1830,390,1830,390,840,390,1830,390,840,390,1830,390,840,390,840,390,840,390,840,390,840,390,1830,390,840,390,1830,390,1830,390,1830,390,840,390,840,390,1830,390,1830,390,1830,390,1830,390,1830,390,840,390,840,390,1830,390,1830,390,1830,390,840,390,1830,390,840,390,3750,390,840,390,840,390,840,390,840,390,840,390,1830,390,1830,390,840,390,1830,390,840,390,1830,390,840,390,840,390,840,390,840,390,840,390,1830,390,840,390,1830,390,1830,390,1830,390,840,390,840,390,1830,390,1830,390,1830,390,1830,390,1830,390,840,390,840,390,1830,390,1830,390,1830,390,840,390,1830,390,840,390,3750,390,840,390,840,390,840,390,840,390,840,390,1830,390,1830,390,840,390,1830,390,840,390,1830,390,840,390,840,390,840,390,840,390,840,390,1830,390,840,390,1830,390,1830,390,1830,390,840,390,840,390,1830,390,1830,390,1830,390,1830,390,1830,390,840,390,840,390,1830,390,1830,390,1830,390,840,390,1830,390,840,390,3780,390,840,390,840,390,840,390,840,390,840,390,1830,390,1830,390,840,390,1830,390,840,390,1830,390,840,390,840,390,840,390,840,390,840,390,1830,390,840,390,1830,390,1830,390,1830,390,840,390,840,390,1830,390,1830,390,1830,390,1830,390,1830,390,840,390,840,390,1830,390,1830,390,1830,390,840,390,1830,390,840,390,3750,390,840,390,840,390,840,390,840,390,840,390,1830,390,1830,390,840,390,1830,390,840,390,1830,390,840,390,840,390,840,390,840,390,840,390,1830,390,840,390,1830,390,1830,390,1830,390,840,390,840,390,1830,390,1830,390,1830,390,1830,390,1830,390,840,390,840,390,1830,390,1830,390;
20;D4;DEBUG;Pulses=511;Pulses(uSec)=450,3840,390,870,390,870,390,870,390,870,390,870,390,1860,390,1860,390,870,390,1860,390,870,390,1860,390,870,390,870,390,870,390,870,390,870,390,1860,390,1860,390,870,390,870,390,1860,390,1860,390,1860,390,1860,390,1860,390,1860,390,1860,390,1860,390,870,390,870,390,1860,390,1860,390,1860,390,870,390,870,390,1860,390,3840,390,870,390,870,390,870,390,870,390,870,390,1860,390,1860,390,870,390,1860,390,870,390,1860,390,870,390,870,390,870,390,870,390,870,390,1860,390,1860,390,870,390,870,390,1860,390,1860,390,1860,390,1860,390,1860,390,1860,390,1860,390,1860,390,870,390,870,390,1860,390,1890,390,1860,390,870,390,870,390,1860,390,3840,390,870,390,870,390,870,390,870,390,870,390,1860,390,1860,390,870,390,1860,390,870,390,1860,390,870,390,870,390,870,390,870,390,870,390,1860,390,1860,390,870,390,870,390,1860,390,1860,390,1860,390,1860,390,1860,390,1860,390,1860,390,1860,390,870,390,870,390,1860,390,1890,390,1860,390,870,390,870,390,1860,390,3840,390,870,390,870,390,870,390,870,390,870,390,1860,390,1860,390,870,390,1860,390,870,390,1860,390,870,390,870,390,870,390,870,390,870,390,1860,390,1860,390,870,390,870,390,1860,390,1860,390,1860,390,1860,390,1860,390,1860,390,1860,390,1860,390,870,390,870,390,1860,390,1860,390,1860,390,870,390,870,390,1860,390,3840,390,870,390,870,390,870,390,870,390,870,390,1860,390,1860,390,870,390,1860,390,870,390,1860,390,870,390,870,390,870,390,870,390,870,390,1860,390,1860,390,870,390,870,390,1860,390,1860,390,1860,390,1860,390,1860,390,1860,390,1860,390,1860,390,870,390,870,390,1860,390,1860,390,1860,390,870,390,870,390,1860,390,3840,390,870,390,870,390,870,390,870,390,870,390,1860,390,1860,390,870,390,1860,390,870,390,1860,390,870,390,870,390,870,390,870,390,870,390,1860,390,1860,390,870,390,870,390,1860,390,1860,390,1860,390,1890,390,1860,390,1860,390,1860,390,1860,390,870,390,870,390,1860,390,1860,390,1860,390,870,390,870,390,1860,390,3840,390,870,390,870,390,870,390,870,390,870,390,1860,390,1860,390,870,390,1860,390,870,390,1860,390,870,390,870,390,870,390,870,390,870,390,1860,390,1860,390,870,390,870,390,1860,390,1860,390,1860,390,1860,390,1860,390,1860,390,1860,390,1860,390,870,390,870,390,1860,390,1860,390;
What are my options? I understand there is some kind of plugin system. I am fairly experienced with Arduino so maybe I could make a new plugin. Can someone start me off?

Thanks!

Re: RF doorbell, not recognised at all

Posted: 06 Oct 2019, 15:18
by martc
Enter learning mode acording rflink manual use "10;RFFIND=ON" and just add this doorbel transmitter, thats all. Read the manual! RFlink support 32 devices manual adding.
http://www.rflink.nl/blog2/faq#RFFind

Re: RF doorbell, not recognised at all

Posted: 07 Oct 2019, 21:23
by csmale
Great, thanks! Got it working now. I can even send a command to it from Domoticz to ring the chime, and this is exactly what I needed.