Page 1 of 1
RFLink Livolo IDs and Unit Codes
Posted: 10 Jan 2020, 21:21
by shalwia
I would like to manually add the Livolo switches to the Domoticz. After selecting the "Livolo" item from available devices list there are three parameters I need to set using trzy select lists - two parameters are related to "ID" and one to "Unit code". Is there any key how should I select values there?
Re: RFLink Livolo IDs and Unit Codes
Posted: 11 Jan 2020, 01:51
by Stuntteam
What you are trying to do is not possible.
For RFlink there is no Livolo setting in Domoticz.
Read:
http://www.rflink.nl/blog2/faq
and scroll to
Q: how to create devices in Domoticz without the original remote control?
Re: RFLink Livolo IDs and Unit Codes
Posted: 24 Jan 2020, 21:36
by shalwia
I’ve already ready it. The Livolo model is not mentioned there (there are Impuls, Kaku, EMW203R), so is there any possibility to control Livolo them using such a codes?
The thing is that Some of the codes (randomly set on the basis of “ID’s” and “Unit codes” seems to be working - after the switch is added manually it’s triggering the Livolo switch correctly. But its a lottery...