Question about espRFLinkMQTT by seb821

Moderators: rtenklooster, Voyager, BertB, Stuntteam

Post Reply
Message
Author
skom27
New user
Posts: 2
Joined: 18 Mar 2020, 13:27
Location: Poland

Question about espRFLinkMQTT by seb821

#1 Post by skom27 » 18 Mar 2020, 21:13

Hello, I am inexperienced at RFlink, and I have a question about the USER_IDs array. If there are PIR sensors in this table, should I enter 0 in the "Third column is interval time to force publication if data did not change"? I want to make a simple alarm system based on domoticz and PIR sensors.
PS. Sorry for my English

skom27
New user
Posts: 2
Joined: 18 Mar 2020, 13:27
Location: Poland

Re: Question about espRFLinkMQTT by seb821

#2 Post by skom27 » 22 Mar 2020, 16:26

At the beginning I would like to thank seb82 for developing espRFLinkMQTT (https://github.com/seb821/espRFLinkMQTT) and help in starting it! :)
This is my first contact with MQTT devices and I don't know how to connect a device / mannequin / motion detector (e.g. PIR kitchen, ID no 113) with what I get from espRFLinkMQTT e.g.

Code: Select all

20;D0;EV1527;ID=06123c;SWITCH=08;CMD=ON;
topic "rflink/#"

Code: Select all

rflink/EV1527-06123c  {"SWITCH":"08","CMD":"ON","SWITCH08":"ON"}
Thank you in advance for tips on how to do it

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests