Living Colors Gen1 documentation

Moderators: rtenklooster, Voyager, BertB, Stuntteam

Post Reply
Message
Author
wltng
New user
Posts: 2
Joined: 12 Apr 2020, 17:57

Living Colors Gen1 documentation

#1 Post by wltng » 12 Apr 2020, 18:21

Hi All,

Does anybody know if there is any documentation available on how to use the Philips Living Colors (Gen1) with RF Link?

I added the CC2500 to my RFLink, and have gotten it to work for the main part.
I figured out what to send to get the desired color, but before it starts working I need to send some commands with the remote.

If I understand correctly, the CC2500 needs the ID of the lamp and gets this from listening to commands between remote and lamp.

After a reboot of the RFLink or restart of Home Assistant the ID is lost and it doesn't work anymore.
Also the switch ID of the remote changes from time to time. If have to change this in Home Assistant as well, otherwise it also doesn't work anymore.

The whole goal was to not need the remote anymore, since those batteries are pretty much empty within a couple of weeks.

Any help on this matter would be much appreciated.

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests