RTSINVERT per individual RTS Record (per controlled blind)

Moderators: rtenklooster, Voyager, BertB, Stuntteam

Post Reply
Message
Author
froekjaer
New user
Posts: 1
Joined: 21 Dec 2020, 22:18

RTSINVERT per individual RTS Record (per controlled blind)

#1 Post by froekjaer » 21 Dec 2020, 22:50

Dear team,

I got 10 Somfy RTS Roman Blinds (Motor: Tilt & Lift 25 WF RTS)
I got most of them connected, and it works, though:
One blind (RTS Record 2) got up/down swapped. All others are ok.

I had to swap EU/US mode to make the blind go full-speed all-the-way up and down.

If I configure 10;RTSINVERT=ON, it works fine, but of cause now all the other blinds are swapped.
Is there any way to configure RTSINVERT for one particular RTS Record?

Eventually, the system is to be connected to my Home Assistant, so maybe there is a way to perform the "up/down swap" within the Home Assistant system, but it would be preferable to have it working within the Nodo-RFLink device :-)

All the best.
Marry Christmas,
Peter Froekjaer, Denmark

20;00;Nodo RadioFrequencyLink - RFLink Gateway V1.1 - R48;
20;01;NodoNRF=ON;
20;02;MySensors=OFF;NO NRF24L01;
10;version;
20;03;VER=1.1;REV=48;BUILD=04;
10;status;
20;04;STATUS;setRF433=ON;setNodoNRF=ON;setMilight=OFF;setLivingColors=OFF;setAnsluta=OFF;setGPIO=OFF;setBLE=OFF;setMysensors=OFF;

10;RTS;0F0102;2;down
20;09;OK;
10;RTS;0F0102;2;stop
20;0A;OK;
10;RTS;0F0102;2;up
20;0B;OK;
10;RTSshow
RTS Record: 0 Address: FFFFFF RC: FFFF
RTS Record: 1 Address: 0E0101 RC: 0448
RTS Record: 2 Address: 0F0102 RC: 000A
RTS Record: 3 Address: 0F0103 RC: 0607
RTS Record: 4 Address: 0F0104 RC: 0655
RTS Record: 5 Address: 0F0105 RC: 0705
RTS Record: 6 Address: 0F0301 RC: 0113
RTS Record: 7 Address: 0F0302 RC: 0136
RTS Record: 8 Address: FFFFFF RC: FFFF
RTS Record: 9 Address: FFFFFF RC: FFFF
RTS Record: 10 Address: FFFFFF RC: FFFF
RTS Record: 11 Address: FFFFFF RC: FFFF
RTS Record: 12 Address: FFFFFF RC: FFFF
RTS Record: 13 Address: FFFFFF RC: FFFF
RTS Record: 14 Address: FFFFFF RC: FFFF
RTS Record: 15 Address: FFFFFF RC: FFFF
RTSINVERT=ON

User avatar
Stuntteam
Site Beheer
Posts: 786
Joined: 27 Jan 2016, 16:46

Re: RTSINVERT per individual RTS Record (per controlled blind)

#2 Post by Stuntteam » 22 Dec 2020, 01:05

I think we can solve that with a small fix...
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests