Somfy Exavia 500 pair with rflink

About receivers, transmitters, transceivers, connections, antennas etc.

Moderators: rtenklooster, BertB, Voyager, Stuntteam

Post Reply
Message
Author
racoonx2p
Normal user
Posts: 2
Joined: 27 Oct 2019, 18:32

Somfy Exavia 500 pair with rflink

#1 Post by racoonx2p » 27 Oct 2019, 18:47

Hello,

I'm using Robotdyn ATmega2560+ESP8266 and RFlink for Somfy devices. I've set it up for my two blinds and it's working as expected. Now I bought Somfy Exavia 500 (Automatic gate opening) but I'm unable to find out how to do pairing with this motor. There are two keypop 2 controlers attached. Pairing is done as on the picture bellow:
chrome_AFMqQtAr7F.png
chrome_AFMqQtAr7F.png (46.14 KiB) Viewed 3560 times
Manual for Exavia

I can see output in log when I press buttons on remote controllers in RFLinkLoader:

Code: Select all

20;11;Debug;RTS P3;a4f50043bbb549cc0033;
20;12;RTS;ID=2bbb549;SWITCH=01;CMD=STOP;
20;13;Debug;RTS P1;a4f20044bbb549c40019;
20;14;RTS;ID=2bbb549;SWITCH=01;CMD=STOP;
20;15;Debug;RTS P2;a4f20044bbb549c80026;
20;16;RTS;ID=2bbb549;SWITCH=01;CMD=STOP;
20;17;Debug;RTS P3;a4f20044bbb549cc0033;
20;18;RTS;ID=2bbb549;SWITCH=01;CMD=STOP;
20;19;Debug;RTS P1;a4f00046bbb549c40019;
20;1A;RTS;ID=2bbb549;SWITCH=01;CMD=STOP;
20;1B;Debug;RTS P2;a4f00046bbb549c80026;
20;1C;RTS;ID=2bbb549;SWITCH=01;CMD=STOP;
20;1D;Debug;RTS P3;a4f00046bbb549cc0033;
20;1E;RTS;ID=2bbb549;SWITCH=01;CMD=STOP;
20;1F;Debug;RTS P1;a4f50143bab549c40019;
20;20;RTS;ID=2bab549;SWITCH=01;CMD=STOP;
When I tried to pair it the same way as blinds I got OK answer:

Code: Select all

10;RTS;555555;0417;9;PAIR;
20;C6;OK;
But when I send command from RFLinkLoder nothing happens. I think problem is that I'm unable to set motor to programming mode and pair RFlink with it.

Any help will/would be appreciated.

Thanks.

Errance
Normal user
Posts: 7
Joined: 05 Nov 2019, 20:06

Re: Somfy Exavia 500 pair with rflink

#2 Post by Errance » 20 Nov 2019, 14:13

I have an Exavia 500 & it's works with Rflink. You need to put the Rflink like the remote control, just in front of the control electronic and send a pair signal. It's a rolling code. Do you speech french ? I've done what you want to do with the help of these websites :

https://www.homentic.fr/rflink-appairer ... ns-jeedom/
https://matdomotique.wordpress.com/2016 ... -et-somfy/

sankukai8
Normal user
Posts: 4
Joined: 22 Nov 2019, 14:17

Re: Somfy Exavia 500 pair with rflink

#3 Post by sankukai8 » 22 Nov 2019, 16:10

bonjour,
Vous posez le rflink sur la cible ou près de la cible? Est ce l'antenne qui compte?
Que capte en fait cette cible?
Chez moi, lorsque j'envoie une commande pair, rien ne se passe...
Que faut il envoyer ensuite?

Errance
Normal user
Posts: 7
Joined: 05 Nov 2019, 20:06

Re: Somfy Exavia 500 pair with rflink

#4 Post by Errance » 23 Nov 2019, 15:32

C'est l'antenne qui compte, mais il faut bien que ça clignote, c'est un peu galère & j'ai passé un peu de temps à réussir.

sankukai8
Normal user
Posts: 4
Joined: 22 Nov 2019, 14:17

Re: Somfy Exavia 500 pair with rflink

#5 Post by sankukai8 » 26 Nov 2019, 08:41

Merci pour la réponse. Je teste ça dès que possible

racoonx2p
Normal user
Posts: 2
Joined: 27 Oct 2019, 18:32

Re: Somfy Exavia 500 pair with rflink

#6 Post by racoonx2p » 09 Dec 2019, 14:51

Hey,

thanks for reply. I don't speak french unfortunately but google translate is good friend of mine ;) .
I know both URLs you shared. My problem is that I'm not sure how to put Exavia to pairing mode :?: . When I try it just like that without anything, I got OK reply but it's not working anyway..

My steps are:

1. Capture opening with my remote

Code: Select all

20;06;RTS;ID=2bab549;SWITCH=01;CMD=STOP;
20;07;Debug;RTS P3;;
2. Pair RFlink

Code: Select all

10;RTS;2BAB550;0100;0;PAIR
20;0D;OK;
3. Send command to open or close gate

Code: Select all

10;RTS;2BAB550;0;STOP;
20;0E;OK;
But when I send command to open gate, nothing happens. Can describe your steps how did you achieve to pair rflink with Exavia and commands you're using to open/close gate please?

Thanks a lot.
Last edited by racoonx2p on 09 Dec 2019, 16:22, edited 2 times in total.

Errance
Normal user
Posts: 7
Joined: 05 Nov 2019, 20:06

Re: Somfy Exavia 500 pair with rflink

#7 Post by Errance » 09 Dec 2019, 15:06

You need to put your antenna on the control electronic target to pair your rflink for the first time. Like the remote in the documentation.
If it works, you'll show a light on the control.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest