Page 1 of 1

Printable RFlink Case

Posted: 14 Nov 2017, 00:26
by ChrisP

For those having access to a 3D printer, I just shared a printable case I made to support:
  • Mega 2560
  • 2 printable antenna to hold hold standard 17.3 cm wire from SYN115. The antennas are screwable into the 2 holes, can be removed for transport.
  • Support and maintain a 3.3V/5V level shifter
  • Support standard NodeMCU V1.0
That way, you can have a clean network enabled RFLink case with everything properly tidy up.

It's there: