RFLink with CC1101
Posted: 19 Oct 2018, 21:22
Hi There,
I'm trying to connect an CC1101 with an Arduino.
I'm using the following schematics/connections, but i'm unable to get it working.
Ground = Ground
(VCC) = VCC 3.3 volt
(MOSI) = MEGA Pin 51 (using level shifter 5V to 3.3V)
(SCK) = MEGA Pin 52 (using level shifter 5V to 3.3V)
(MISO) = MEGA Pin 50 (using level shifter 5V to 3.3V)
(CS) = MEGA Pin 47 (using level shifter 5V to 3.3V)
Should I be able to use the CC1101 instead of the Aurel transceivers with RFlink ?
Is there anything incorrect with my connections (above) ?
or other.................
With regards,
Passie
I'm trying to connect an CC1101 with an Arduino.
I'm using the following schematics/connections, but i'm unable to get it working.
Ground = Ground
(VCC) = VCC 3.3 volt
(MOSI) = MEGA Pin 51 (using level shifter 5V to 3.3V)
(SCK) = MEGA Pin 52 (using level shifter 5V to 3.3V)
(MISO) = MEGA Pin 50 (using level shifter 5V to 3.3V)
(CS) = MEGA Pin 47 (using level shifter 5V to 3.3V)
Should I be able to use the CC1101 instead of the Aurel transceivers with RFlink ?
Is there anything incorrect with my connections (above) ?
or other.................
With regards,
Passie