Rflink et BFT

French support forum, post can be done in French, answers will either be in French or in English.

Moderators: rtenklooster, Voyager, BertB, Stuntteam, Deennoo

Post Reply
Message
Author
team18fr
New user
Posts: 6
Joined: 17 Nov 2016, 19:09

Rflink et BFT

#1 Post by team18fr » 17 Nov 2016, 19:14

Salut à tous j'ai ma porte se garage qui a un moteur BFT avec rolling code dans les équipements il apparait bien quand j'appuie sur mes boutons j'ai

Code: Select all

20;30;Keeloq;ID=6dda;SWITCH=04;CMD=ON;BAT=OK;
ou pour l'autre bouton

Code : Tout sélectionner

Code: Select all

20;30;Keeloq;ID=6dda;SWITCH=02;CMD=ON;BAT=OK;
Mais après avoir crée mes boutons lorsque j'envoie la commande rien ne se passe. Merci de votre aide.

User avatar
Stuntteam
Site Beheer
Posts: 786
Joined: 27 Jan 2016, 16:46

Re: Rflink et BFT

#2 Post by Stuntteam » 18 Nov 2016, 12:08

Keeloq = rolling code protocol
This means "receive only"
-=# RFLink Gateway Development Team #=-
Introduction: http://www.nemcon.nl/blog2/
Generic Support forum: http://www.esp8266.nu/forum/viewforum.php?f=8

team18fr
New user
Posts: 6
Joined: 17 Nov 2016, 19:09

Re: Rflink et BFT

#3 Post by team18fr » 18 Nov 2016, 14:25

Dommage car j'avais vu dans les équipements compatible BFT en 433MHZ et donc la je peux rien faire. Merci pour ta réponse.

welverin
New user
Posts: 5
Joined: 19 Apr 2020, 13:53

Re: Rflink et BFT

#4 Post by welverin » 19 Apr 2020, 13:58

Hi all,
4 years have passed since the last post, I would like to know if the problems with the integration between rflink and the BFT garage doors have been solved.
Reading the signal I found keyloq signature :
20;0D;Keeloq;ID=28e9;SWITCH=04;CMD=ON;BAT=OK;

i have a mitto remote to open the garage door.

I already have an rflink that I use for RTS / Somfy, so it is possible to decode the rolling codes in general.
So I wondered if it was also possible to decode the BFT door openers.
Thank you

Leonardo

Post Reply

Who is online

Users browsing this forum: No registered users and 9 guests