Ball valve control and feedback indication.

Moderators: grovkillen, Stuntteam, TD-er

Post Reply
Message
Author
gnarpan
New user
Posts: 2
Joined: 18 Jan 2019, 12:35

Ball valve control and feedback indication.

#1 Post by gnarpan » 18 Jan 2019, 14:10

Hello

I have a cabin 400km from where i live now, so i want to be safe when am not there.
So have been putting up a domoticz server in my cabin and using LTG-4g modem to connect to internet, working awesome, no dropouts yet.
Have set up telegram messages for different scenarios when temperature gets out of control etc.

And now i have made a esp easy to control my incoming water so i can shut it on/off and get notification when the valve are open or closed.
The valve i used have 3 extra wires to signaling open or closed so i used them on my esp8266 and config domoticz to use them as switches.
Plus a relay to turn on the valve, the valve have automatic close when no power is connected.

Here are some pics my setup, going to add a ds1820 temp and humidity sensor soon.

IMG_20190118_133338.jpg
IMG_20190118_133338.jpg (3.53 MiB) Viewed 2204 times
IMG_20190118_133127.jpg
IMG_20190118_133127.jpg (3.7 MiB) Viewed 2204 times
IMG_20190118_133113.jpg
IMG_20190118_133113.jpg (3.78 MiB) Viewed 2204 times
IMG_20190118_133154.jpg
IMG_20190118_133154.jpg (314.15 KiB) Viewed 2204 times

Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests