MQTT not working with the sensor made with ESPeasy

[jaka_smode]

Hello,
I'm new to the ESPeasy software, so I came here to seek help.
Recently I made a wireless sensor using NodeMCU and DHT22 with the ESPeasy software and now I can not successfully connect it via mqtt. i’m guessing there could be a error in the broker or in the espeasy configuration. Have been working on this problem for quite long time and I still haven’t found the solution. MQTT broker is on the OpenHAB and I want to trouble shot the problem. When I was observing the traffic I only got a status of the sensor and another member of a openhab forum which connected the sensor succesfully told me he got more messeges.
My mqtt traffic

traffic of a member

And here is my sensor setup







Thank you for all the help in advance.

[grovkillen]

You don't have the "send to controller" checked.

[jaka_smode]

Ok, so I disabled that and now I have big red cross in the enabled column and the mqtt.fx is still receiving only status

[grovkillen]

No, I mean in the settings menu of the DEVICES.

[jaka_smode]

Thank you