District heating - Reading Kamstrup Multical 601

Moderators: grovkillen, Stuntteam, TD-er

Post Reply
Normal user
Posts: 55
Joined: 28 Dec 2017, 15:56

District heating - Reading Kamstrup Multical 601

#1 Post by remko2000 » 12 Nov 2019, 17:07

I'm looking for a solution to read the values of my kamstrup multical 601 heating. I bought a sensor on a Danish site (https://wiki.hal9k.dk/projects/kamstrup) and try the ESP-easy (test)script for the kamstrup 401:
https://github.com/chipsi007/ESPEasyPlu ... a95a012072

This isn't working. I get:

Code: Select all

EVENT: Kamstrup_601#Heat=0.00
EVENT: Kamstrup_601#Volume=0.00
in the log of my wemos D1. I connect the TX and RX of my sensor to D5 and D6 of my Wemos. GND to GND and power to 3,3V

Is there someone who succeeded to rewrite this script or find another way to implant this type of Kamsstrup in Domoticz?

Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests