Network traffic LED

Moderators: grovkillen, Stuntteam, TD-er

Post Reply
Message
Author
dannybloe
Normal user
Posts: 36
Joined: 16 Dec 2015, 16:29

Network traffic LED

#1 Post by dannybloe » 26 Jan 2016, 09:00

Hi folks,

Is it somehow possible to have an LED connected to the ESP that is on during communication (http/wifi)? Or Off. I have a box in which the esp is placed but it would be nice to have some outward LED that shows the device is on and there is activity (either using one or two LEDs).

Cheers,

Danny

tozett
Normal user
Posts: 734
Joined: 22 Dec 2015, 15:46
Location: Germany

Re: Network traffic LED

#2 Post by tozett » 26 Jan 2016, 20:38

+1
(Led as device, option to control state, i.e wifi, uptime, ....)

Deennoo
Normal user
Posts: 158
Joined: 07 Sep 2015, 13:03

Re: Network traffic LED

#3 Post by Deennoo » 27 Jan 2016, 18:47

Depending on which usage :

For my pulses counter and temps sensors domoticz send me a notification if value are older than 30 minutes, that mean that there is a problème.

But since i'm using wemos mini d1 board (1 Mounth now) i never get a problème ne past with sp01 it was 1 by week.

tozett
Normal user
Posts: 734
Joined: 22 Dec 2015, 15:46
Location: Germany

Re: Network traffic LED

#4 Post by tozett » 27 Jan 2016, 18:57

just as visible status of some runing-states..
must be controllable, maybe via level-plugin. maybe one can combine this two threads.
http://www.esp8266.nu/forum/viewtopic.php?f=4&t=732

but anyway thanks for the insight of stability with wemos. i consider to give it a try... 8-)

Post Reply

Who is online

Users browsing this forum: No registered users and 17 guests