Issue connecting ESP_Easy_0 SSID

Moderators: Voyager, BertB, rtenklooster, Stuntteam, grovkillen, TD-er

Post Reply
Message
Author
jme
Normal user
Posts: 28
Joined: 11 Apr 2018, 14:20

Issue connecting ESP_Easy_0 SSID

#1 Post by jme » 06 Dec 2018, 10:03

Hi,

I just receive 3 new SONOFF devices i would like to flash with ESP easy.

I already falshed one sonoff and a sonoff4ch in the past without any issue.

I just flash the first of my 3 Sonoff, flash looks to be ok, i can see the ESP_Easy_0 SSID, i try to connect, it ask the password, i enter the password "configesp" en then it looks like my wifi card restart ( all ssid dissapear) and i get a message can't connect to ssid.

I've tested with 2 different pc, same issue.

Any idea what can be wrong ?

Thx

Cino2424
Normal user
Posts: 7
Joined: 30 Sep 2018, 16:35

Re: Issue connecting ESP_Easy_0 SSID

#2 Post by Cino2424 » 06 Dec 2018, 11:59

Look at serial monitor. You can give ssid and password manually

jme
Normal user
Posts: 28
Joined: 11 Apr 2018, 14:20

Re: Issue connecting ESP_Easy_0 SSID

#3 Post by jme » 06 Dec 2018, 14:43

Could you just explain how to connect the serial monitor .
Which app do i need ?

Thx

jme
Normal user
Posts: 28
Joined: 11 Apr 2018, 14:20

Re: Issue connecting ESP_Easy_0 SSID

#4 Post by jme » 06 Dec 2018, 19:57

hi,

Here is the Terminal output:

Code: Select all

2779 : WD   : Uptime 0 ConnectFailures 0 FreeMem 20784

 ets Jan  8 2013,rst cause:4, boot mode:(3,7)

wdt reset
load 0x4010f000, len 1384, room 16
tail 8
chksum 0x2d
csum 0x2d
vbb28d4a3
~ld
   ▒U108 :

INIT : Booting version: mega-20181204 (ESP82xx Core 2_4_2, NONOS SDK 2.2.1(cfd48f3), LWIP: 2.0.3 PUYA support)
109 : INIT : Warm boot #1 - Restart Reason: Hardware Watchdog
111 : FS   : Mounting...
118 : FS   : Mount successful, used 75802 bytes of 113201
469 : CRC  : program checksum       ...OK
480 : CRC  : SecuritySettings CRC   ...OK
482 : CRC  : binary has changed since last save of Settings
503 : INIT : Free RAM:24056
504 : INIT : I2C
505 : INIT : SPI not enabled
519 : INFO : Plugins: 46 [Normal] (ESP82xx Core 2_4_2, NONOS SDK 2.2.1(cfd48f3), LWIP: 2.0.3 PUYA support)
522 : WIFI : No valid wifi settings
523 : WIFI : Could not connect to AP!
525 : WIFI : Set WiFi to AP
1447 : WIFI : AP Mode ssid will be ESP_Easy_0 with address 192.168.4.1
2783 : WD   : Uptime 0 ConnectFailures 0 FreeMem 20768

 ets Jan  8 2013,rst cause:4, boot mode:(3,7)

wdt reset
load 0x4010f000, len 1384, room 16
tail 8
chksum 0x2d
csum 0x2d
vbb28d4a3
~ld
   ▒U109 :

INIT : Booting version: mega-20181204 (ESP82xx Core 2_4_2, NONOS SDK 2.2.1(cfd48f3), LWIP: 2.0.3 PUYA support)
110 : INIT : Warm boot #2 - Restart Reason: Hardware Watchdog
113 : FS   : Mounting...
119 : FS   : Mount successful, used 75802 bytes of 113201
470 : CRC  : program checksum       ...OK
482 : CRC  : SecuritySettings CRC   ...OK
483 : CRC  : binary has changed since last save of Settings
504 : INIT : Free RAM:24056
506 : INIT : I2C
506 : INIT : SPI not enabled
520 : INFO : Plugins: 46 [Normal] (ESP82xx Core 2_4_2, NONOS SDK 2.2.1(cfd48f3), LWIP: 2.0.3 PUYA support)
523 : WIFI : No valid wifi settings
525 : WIFI : Could not connect to AP!
526 : WIFI : Set WiFi to AP
1449 : WIFI : AP Mode ssid will be ESP_Easy_0 with address 192.168.4.1
2783 : WD   : Uptime 0 ConnectFailures 0 FreeMem 20768


Domosapiens
Normal user
Posts: 204
Joined: 06 Nov 2016, 13:45

Re: Issue connecting ESP_Easy_0 SSID

#5 Post by Domosapiens » 06 Dec 2018, 21:26

Look at serial monitor. You can give ssid and password manually
See:
https://www.letscontrolit.com/wiki/inde ... _Reference
30+ ESP units for production and test. Ranging from control of heating equipment, flow sensing, floor temp sensing, energy calculation, floor thermostat, water usage, to an interactive "fun box" for my grandson. Mainly Wemos D1.

jme
Normal user
Posts: 28
Joined: 11 Apr 2018, 14:20

Re: Issue connecting ESP_Easy_0 SSID

#6 Post by jme » 06 Dec 2018, 22:22

Hi,

Thank for the tip, set up the wifi trough the serial did the trick.

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests