As I'm just beginning with ESPEasy, i'm reading the Wiki to understand how things work.
I found several points to improve:
http://www.esp8266.nu/index.php/ESPEasy
In fact, it should a mandatory stop, not only for Domoticz users... non Domoticz users might want to skip that essential part.Configuration
To get you on track with the ESP Easy, we provide a tutorial to demonstrate the basics Tutorial_Domoticz_Switch For all further applications, please check their respective wiki page Applications
And in this page:
http://www.esp8266.nu/index.php/Tutoria ... icz_Switch
Hold on a second: when I scan my wifi networks I can only see a protected ESP_0, where is the WPA key ???Connect the ESP Easy to your network
If you have your ESP board loaded with ESP Easy firmware, powerup the unit and an Access point named "ESP_0" should appear. Connect to this access point and browse to http://192.168.4.1. If all went well, the following screen should be shown:
Further down...
So please add in clear that the default key is "configesp"
Other than that, this project is awesome !