SOLVED (since r111) BUG -> RFID-ID different in RULES vs. MQTT

[tozett]

hi,
the tag-id from the RFID reader is on MQTT and in the Web-Gui the same,
but different if i send it from RULES:

Code: Select all

  SendToUDP,192.168.14.253,4751,[rfid#Tag]

is this as it should, or could this be made the same ID on all channels?

look:

[tozett]

i played with my new nfc-board and different tags,
so it seems to be a bug (i am on v109) :
while sending the tag-id from RULES it is different from MQTT.
but as i used different types of tags, it looks to me like the TAG-ID from RULES seems to be more the VENDOR, than the ID itself..
???
i myself as a noob looked in the source, but found only an array with the ID up from [5] in the pn532.ino,
but no clue how this all plays together.
seems a thing for devs, so i changed the headline and try to report a bug here..

[Martinus]

Bug confirmed. I will try to address this in the next build.

[tozett]

wonderful, thanks. and thanks for confirmation--
i wanted to mount my fingerprint-reader yesterday,
but now i wait for the next build and check with it -- before i screw all my elektronics to the wall.


i wish i had experience in coding and could find it myself, but all i could read was to see a char-array for UDP-send and a long-int for the key-id.
but dont know anything more to find the bug, you found. anyway i am glad, this fix will put my fingerprint-reader with wiegand-interface on service..

thanks

[Martinus]

Try R111 on github, should work now...

[tozett]

i update my units OTA, everything is fine now. THAAAAANKS!
i can screw the fingerprint to the wall...

[timsson]

Hello,
only a question...
I ve got 2 sony devices (z3 and z4) and both have the same rfid (id=1690xxxx)
Is this correct???
Thanks

[tozett]

could you explain some details?
reader-devices have an ID?
or key-fobs on different reader, or with the same ID?...

[timsson]

If i switch on the NFC on both devices (mobilphone+tablet, the pn532 scan the same tag?!
Is it possible to change the NFC/RFID from the sony phones? How can i dedect the right one to open my door?

[tozett]

you use your phone as an nfc-key,
and you use your tablet as an nfc-key.

both are read out from the pn532-reader on an ESPEASY with the same ID?

this is your problem?

[timsson]

Yes it is my problem...

[tozett]

so it looks that this is nothing special with the espeasy-firmware.
and nothing special with an nfc-reader connected to the espeasy-firmware.

it looks, that you have static-NFC-IDs on your phone+tablet (android-based firmware, i guess).
may you dive deeper into this, and see it you can change this on your phone/tablet?

http://stackoverflow.com/questions/2723 ... h-hce-mode