Motion - SW : State 0.00 = off

Moderators: grovkillen, Stuntteam, TD-er

Post Reply
Message
Author
the cosmic gate
Normal user
Posts: 102
Joined: 14 Nov 2015, 20:17

Motion - SW : State 0.00 = off

#1 Post by the cosmic gate » 26 Aug 2016, 09:39

Running ESP EASY version 120 with a HC-SR501 motion sensor connected, and when i look in the log it tells me :

Code: Select all

42339421 : SW : State 0.00
42340422 : SW : State 0.00
What means that the ESP send the "off" signal to domoticz , what gives me the result in the domo log:

Code: Select all

2016-08-26 09:30:20	Off
2016-08-26 09:29:20	Off
2016-08-26 09:28:20	Off
2016-08-26 09:27:20	Off
2016-08-26 09:26:20	Off
2016-08-26 09:25:20	Off
2016-08-26 09:24:20	Off
So after a few hours this log is 65 pages big :(
Is there a way to solve this ? ( or is it maybe the motion sensor itself who sends this state ? )

Thnx for helping me out (agiain)

ayasystems
Normal user
Posts: 39
Joined: 09 Aug 2016, 09:45

Re: Motion - SW : State 0.00 = off

#2 Post by ayasystems » 28 Aug 2016, 13:55

Try setting delay = 0

The status will be send only when it has be changed

tozett
Normal user
Posts: 734
Joined: 22 Dec 2015, 15:46
Location: Germany

Re: Motion - SW : State 0.00 = off

#3 Post by tozett » 28 Aug 2016, 14:44

cool.
should go to the wiki... :oops:

Post Reply

Who is online

Users browsing this forum: No registered users and 9 guests