Multiple sensors, actuators - single board

Moderators: grovkillen, Stuntteam, TD-er

Post Reply
Message
Author
vobo70
Normal user
Posts: 11
Joined: 10 Oct 2016, 09:53

Multiple sensors, actuators - single board

#1 Post by vobo70 » 10 Oct 2016, 10:09

Hello,
I'n new to this board, and I have one question:
can I connect to single board like this (have 11 gpio pins):
https://pl.aliexpress.com/item/New-Wire ... 73762.html
multiple sensors:
sht11 humidity / temperature - 2 gpio pins
switch - 1 gpio pin
relay - 2 gpio pins
lcd display - i2c - 1 gpio
thanks in advance
Maciek
Top
User avatar
nonflammable
Normal user
Posts: 42
Joined: 09 Mar 2016, 22:19
Location: Poland

Re: Multiple sensors, actuators - single board

#2 Post by nonflammable » 10 Oct 2016, 16:06

Yes, You can ... but i think you should find V2 version ;)
Top
vobo70
Normal user
Posts: 11
Joined: 10 Oct 2016, 09:53

Re: Multiple sensors, actuators - single board

#3 Post by vobo70 » 10 Oct 2016, 16:15

Why not v3?
Shouldn't be better?
Top
User avatar
nonflammable
Normal user
Posts: 42
Joined: 09 Mar 2016, 22:19
Location: Poland

Re: Multiple sensors, actuators - single board

#4 Post by nonflammable » 10 Oct 2016, 16:26

Only one thing is different on boards - USB-UART chip.
V2 = CP2012
V3 = CH340G
some users have problems with CH340G ... especially with drivers
Top
vobo70
Normal user
Posts: 11
Joined: 10 Oct 2016, 09:53

Re: Multiple sensors, actuators - single board

#5 Post by vobo70 » 11 Oct 2016, 00:26

Thanks. I will buy v2 then.
Top
Post Reply

Return to “ESP Easy: General Discussion”

Who is online

Users browsing this forum: No registered users and 43 guests