ESPEasy Mega - Pulse counter values

Moderators: grovkillen, Stuntteam, TD-er

Post Reply
Message
Author
nick-head
Normal user
Posts: 41
Joined: 15 Nov 2016, 11:09
Location: North East UK

ESPEasy Mega - Pulse counter values

#1 Post by nick-head » 27 Dec 2016, 11:59

Hi All,

Does anyone know if you can send separate time values to Domoticz that were obtained by the Pulse Counter.

I see Delta, Delta/Total/Time and Total only. I need the Time values only and can't find how to do it.

I have tried all combinations but no luck, I may be missing something really simple.

I am using the value for a kW meter to show kW's used at that time, it woks on the OLED but cannot send
it to Domoticz.

Regards

Nick
ESP32, Arduino's,Raspberry Pi's, ESP8266's, Nextion's, Sonoff's, LightWaveRF's, RFXCom 433, and a headache
And a HackRF One, as a present to myself.

nick-head
Normal user
Posts: 41
Joined: 15 Nov 2016, 11:09
Location: North East UK

Re: ESPEasy Mega - Pulse counter values

#2 Post by nick-head » 27 Dec 2016, 16:49

Thanks for the help.

Had to do a re-write on the source-code, but, it works.
[img]
ESPPower.JPG
ESPPower.JPG (50.74 KiB) Viewed 3205 times
[/img]
ESP32, Arduino's,Raspberry Pi's, ESP8266's, Nextion's, Sonoff's, LightWaveRF's, RFXCom 433, and a headache
And a HackRF One, as a present to myself.

nick-head
Normal user
Posts: 41
Joined: 15 Nov 2016, 11:09
Location: North East UK

Re: ESPEasy Mega - Pulse counter values

#3 Post by nick-head » 27 Dec 2016, 18:34

Yay, finally, and it talks to Domoticz as I intended to do in the first place.
espowermeter.jpg
espowermeter.jpg (44.37 KiB) Viewed 3193 times
These forums are good arn't they .
ESP32, Arduino's,Raspberry Pi's, ESP8266's, Nextion's, Sonoff's, LightWaveRF's, RFXCom 433, and a headache
And a HackRF One, as a present to myself.

papperone
Normal user
Posts: 497
Joined: 04 Oct 2016, 23:16

Re: ESPEasy Mega - Pulse counter values

#4 Post by papperone » 27 Dec 2016, 20:24

great job! woudl you mind to share the code/plugin you used??
My TINDIE Store where you can find all ESP8266 boards I manufacture --> https://www.tindie.com/stores/GiovanniCas/
My Wiki Project page with self-made PCB/devices --> https://www.letscontrolit.com/wiki/inde ... :Papperone

nick-head
Normal user
Posts: 41
Joined: 15 Nov 2016, 11:09
Location: North East UK

Re: ESPEasy Mega - Pulse counter values

#5 Post by nick-head » 27 Dec 2016, 20:45

I am using the ESPEasy-Mega Version 147 Experimental.

This code replaces the original Pulse Counter within the source code.

I am not even sure I modified it in the correct way / legal code and the like, however it is working
as I want it for now, don't know about long term, but it's the best I can do because the help wasn't
too forthcoming.

I will mod it later to create it's own plugin and re-instate the original Pulse Counter for compatibility.
Maybe some-one later on in the future will do a proper plugin, or give me a few tips on what
actually to do as I haven't got much of a clue other than experimentation.
Last edited by nick-head on 01 Jan 2017, 12:08, edited 1 time in total.
ESP32, Arduino's,Raspberry Pi's, ESP8266's, Nextion's, Sonoff's, LightWaveRF's, RFXCom 433, and a headache
And a HackRF One, as a present to myself.

nick-head
Normal user
Posts: 41
Joined: 15 Nov 2016, 11:09
Location: North East UK

Re: ESPEasy Mega - Pulse counter values

#6 Post by nick-head » 27 Dec 2016, 22:59

Iv'e changed it over to Plugin P012 now, so it can run with P003.
If anyone wants to mess about with it and make it better.
ESP32, Arduino's,Raspberry Pi's, ESP8266's, Nextion's, Sonoff's, LightWaveRF's, RFXCom 433, and a headache
And a HackRF One, as a present to myself.

vojtishek
Normal user
Posts: 70
Joined: 12 Jan 2017, 08:00

Re: ESPEasy Mega - Pulse counter values

#7 Post by vojtishek » 02 Oct 2018, 15:10

Hi, where I can find a plugin please and how to setup domoticz?
Basically I would like to measure time when my termostat light is on and put formula in espeasy to get wattage.
Then send to domoticz.

Help appreciated.
Vojta

Post Reply

Who is online

Users browsing this forum: No registered users and 10 guests