SendToHTTP not working

[manjh]

I've been trying to include a SendToHTTP statement in a rule, but somehow Domoticz does not get the command.
Have tried everything, and am now slowly going mad...

I'm sure this is one of these "of course" mistakes, most likely something stupid, but I don't see it.
Can someone check this statement and spot the error:

Code: Select all

SendToHTTP 10.0.0.199,8080,/json.htm?type=paramm=switchlight&command&idx=1687&switchcmd=On

I checked the IP of the Domoticz server, it is correct. Also the idx of the switch is correct.

[manjh]

any ideas? I've just spent some more time trying to get this to work, no progress...

[manjh]

Found it.
Turns out I copied the sendtohttp statement from a rules example somewhere, and it contained an error. I had already wondered about the extra "m" in "paramm".
I now tried this:

Code: Select all

sendtohttp,10.0.0.199,8080,/json.htm?param=switchlight&type=command&idx=1687&switchcmd=On

and this works like a charm.....

Lesson learned: never copy/paste any code without understanding...

[grovkillen]

Thanks! Fixed the Wiki.

[vojtishek]

Found it.
Turns out I copied the sendtohttp statement from a rules example somewhere, and it contained an error. I had already wondered about the extra "m" in "paramm".
I now tried this:

Code: Select all

sendtohttp,10.0.0.199,8080,/json.htm?param=switchlight&type=command&idx=1687&switchcmd=On

and this works like a charm.....

Lesson learned: never copy/paste any code without understanding...

Hi, I tried to achieve the same in this topic https://www.letscontrolit.com/forum/vie ... f=5&t=3037 , but still without success.
Could you please try to examine If I'm doing something incorrectly?
Thanks