Trying to use buzzer in espeasy[SOLVED]
Moderators: grovkillen, Stuntteam, TD-er
Trying to use buzzer in espeasy[SOLVED]
I am using espeasy v2.0.0-dev11
when I use the pulse command http://192.168.1.99/control?cmd=Pulse,14,1,200 I am able to get a beep from the buzzer
but I can't seem to use the tone command
when I use the tone command http://192.168.1.99/control?cmd=tone,14,330,2000 I get this error message
Unknown or restricted command!
need help
thanks
Raj
when I use the pulse command http://192.168.1.99/control?cmd=Pulse,14,1,200 I am able to get a beep from the buzzer
but I can't seem to use the tone command
when I use the tone command http://192.168.1.99/control?cmd=tone,14,330,2000 I get this error message
Unknown or restricted command!
need help
thanks
Raj
Last edited by rajbadri on 20 Sep 2017, 08:31, edited 1 time in total.
Re: Trying to use buzzer in espeasy
tried rtttl command but same error message
http://192.168.1.99/control?cmd=rtttl,1 ... =180,c,e,g
Unknown or restricted command!
http://192.168.1.99/control?cmd=rtttl,1 ... =180,c,e,g
Unknown or restricted command!
- grovkillen
- Core team member
- Posts: 3621
- Joined: 19 Jan 2017, 12:56
- Location: Hudiksvall, Sweden
- Contact:
Re: Trying to use buzzer in espeasy
https://www.letscontrolit.com/wiki/inde ... zer_(RTTL)
This is at the moment only available in the "test" build, not in normal build.
This is at the moment only available in the "test" build, not in normal build.
ESP Easy Flasher [flash tool and wifi setup at flash time]
ESP Easy Webdumper [easy screendumping of your units]
ESP Easy Netscan [find units]
Official shop: https://firstbyte.shop/
Sponsor ESP Easy, we need you
ESP Easy Webdumper [easy screendumping of your units]
ESP Easy Netscan [find units]
Official shop: https://firstbyte.shop/
Sponsor ESP Easy, we need you
Re: Trying to use buzzer in espeasy[SOLVED]
Thanks, it's fantastic !
Re: Trying to use buzzer in espeasy[SOLVED]
I got my buzzer working, it plays pulse and melodies. But the after notes have been played the buzzer keeps beeping one continous note.
It only stops after I reset.
Any suggetions how to fix this?
It only stops after I reset.
Any suggetions how to fix this?
Last edited by d3rax on 17 Feb 2018, 22:58, edited 1 time in total.
Re: Trying to use buzzer in espeasy[SOLVED]
Are you still on version dev 11?
Did you also test to send something like a buzzer off command? (not sure if it exists, just an idea)
- grovkillen
- Core team member
- Posts: 3621
- Joined: 19 Jan 2017, 12:56
- Location: Hudiksvall, Sweden
- Contact:
Re: Trying to use buzzer in espeasy[SOLVED]
ESP Easy Flasher [flash tool and wifi setup at flash time]
ESP Easy Webdumper [easy screendumping of your units]
ESP Easy Netscan [find units]
Official shop: https://firstbyte.shop/
Sponsor ESP Easy, we need you
ESP Easy Webdumper [easy screendumping of your units]
ESP Easy Netscan [find units]
Official shop: https://firstbyte.shop/
Sponsor ESP Easy, we need you
Re: Trying to use buzzer in espeasy[SOLVED]
I’m on the latest stable ‘test’ firmware. I dont think there is a stop command?
Re: Trying to use buzzer in espeasy[SOLVED]
I dont think I have the above isue. My tune does not loop, it plays once and the a different note endless beeps.
- grovkillen
- Core team member
- Posts: 3621
- Joined: 19 Jan 2017, 12:56
- Location: Hudiksvall, Sweden
- Contact:
Re: Trying to use buzzer in espeasy[SOLVED]
But it's still not a stable code.
ESP Easy Flasher [flash tool and wifi setup at flash time]
ESP Easy Webdumper [easy screendumping of your units]
ESP Easy Netscan [find units]
Official shop: https://firstbyte.shop/
Sponsor ESP Easy, we need you
ESP Easy Webdumper [easy screendumping of your units]
ESP Easy Netscan [find units]
Official shop: https://firstbyte.shop/
Sponsor ESP Easy, we need you
Re: Trying to use buzzer in espeasy[SOLVED]
Hi, Newbie here, I have a strange issue, my active buzzer keeps a continuous beep and doesn't stop after the pulse, tone or RTTTL. What could be the issue?
Who is online
Users browsing this forum: No registered users and 47 guests