my esp8266-01 version 1024 not connect

[r16]

hello friends.
i flashed my esp8266-01 and flashed OK.
After that i disconnect all the wires of esp, and connect it on external font 3.3v.
but when i turn it on... the red led is on, and wait a little and show blink other blue.
But i dont see on my computer. the wifi of esp.

what i can i do? what is wrong?

[Shardan]

Please connect the serial and use a serial monitor program (Arduino IDE, putty or similiar) to log the output of the ESP.

Then post the output here.

Regards
Shardan.

[r16]

Shardan

Fatal exception (0):
epc1=0x400ef424, epc2=0x00000000, epc3=0x00000000, excvaddr=0x00000000, depc=0x00000000
Fatal exception (0):
epc1=0x400ef424, epc2=0x00000000, epc3=0x00000000, excvaddr=0x00000000, depc=0x00000000
Fatal exception (0):
epc1=0x400ef424, epc2=0x00000000, epc3=0x00000000, excvaddr=0x00000000, depc=0x00000000
Fatal exception (0):
epc1=0x400ef424, epc2=0x00000000, epc3=0x00000000, excvaddr=0x00000000, depc=0x00000000
Fatal exception (0):
epc1=0x400ef424, epc2=0x00000000, epc3=0x00000000, excvaddr=0x00000000, depc=0x00000000
Fatal exception (0):
epc1=0x400ef424, epc2=0x00000000, epc3=0x00000000, excvaddr=0x00000000, depc=0x00000000

[r16]

i flashed other and the error are:

x400ef424, epc2=0x00000000, epc3=0x00000000, excvaddr=0x00000000, depc=0x00000000
Fatal exception (0):
epc1=0x400ef424, epc2=0x00000000, epc3=0x00000000, excvaddr=0x00000000, depc=0x00000000
Fatal exception (0):
epc1=0x400ef424, epc2=0x00000000, epc3=0x00000000, excvaddr=0x00000000, depc=0x00000000
Fatal exception (0):
epc1=0x400ef424, epc2=0x00000000, epc3=0x00000000, excvaddr=0x00000000, depc=0x00000000
Fatal exception (0):
epc1=0x400ef424, epc2=0x00000000, epc3=0x00000000, excvaddr=0x00000000, depc=0x00000000
Fatal exception (0):
epc1=0x400ef424, epc2=0x00000000, epc3=0x00000000, excvaddr=0x00000000, depc=0x00000000
Fatal exception (0):
epc1=0x400ef424, epc2=0x00000000, epc3=0x00000000, excvaddr=0x00000000, depc=0x00000000
Fatal exception (0):
epc1=0x400ef424, epc2=0x00000000, epc3=0x00000000, excvaddr=0x00000000, depc=0x00000000
Fatal exception (0):
epc1=0x400ef424, epc2=0x00000000, epc3=0x00000000, excvaddr=0x00000000, depc=0x000000

[papperone]

can you post a picture of the module?
can you confirm which BIN file you selected for flashing?

[r16]

My module is black: i have two. I flashed this ESPEasy_v2.0.0-dev12_dev_1024.bin
https://photos.app.goo.gl/vsNwhN4izxLb9d5b2

when i flashed when finish says: FLASH COMPLET

after that i disconect all the wires except + and - after i connect the esp on this board:https://photos.app.goo.gl/1SrTIJsJk16xsyqF2

and dont show me WIFI

[Shardan]

Did you use a FTDI flasher?

[r16]

i make a vídeo https://youtu.be/UHk-I0g4etY

[r16]

ok guys i found the problema.its was need to connect CH PD too.
now i can show the wifi but it asked a password.
what is password?

[Drum]

Try "configesp"....
https://www.letscontrolit.com/wiki/inde ... he_ESP8266

[r16]

Thank you.