MQTT Import and EasyFormula

[BaGRoS]

Mathematical operations do not work properly. Adding or subtraction, because I only checked it.
I send 5 via CloudMQTT, I want to add 2 unfortunately the result is still 5.

1.jpg (158.7 KiB) Viewed 5571 times

2.jpg (155.78 KiB) Viewed 5571 times

3.jpg (157.91 KiB) Viewed 5571 times

[danmero]

Always state your built version.

Issue confirmed on v2.0.0-dev10

Regards,

[BaGRoS]

ESPEasy_v2.0.0-dev12

[grovkillen]

Please add a new issue on GitHub.

[TD-er]

Where should %value% come from?
What is its input?
Normally, you should include the devicename and parameter name, but what should you expect?

I guess it should be something like the temperature reported via the MQTT sender, but where do you define what value to use?

I would expect something like "%TEMP%+2"

[BaGRoS]

%value% is from https://customer.cloudmqtt.com/instance for test I send numbers 5, 4, -5...
I test %TEMP%-100 and not working.
I am doing this because MQTT Import cannot take a negative value, for example -5. I was hoping to add 100 somewhere, and here I will subtract 100 and I can only send positive values. Unfortunately, mathematical calculations do not work.

[vader]

Don't worry, with that speed at the moment all bugs will be fixed until 2050.... or not....

[TD-er]

Don't worry, with that speed at the moment all bugs will be fixed until 2050.... or not....

Well bugs are fixed quite fast at the moment, only problem is "you" -users who find bugs- outnumber the bugfixers
And Christmas holidays are coming, which hopefully gives a bit more spare time to program