MQTT Import and EasyFormula
Moderators: grovkillen, Stuntteam, TD-er
MQTT Import and EasyFormula
Mathematical operations do not work properly. Adding or subtraction, because I only checked it.
I send 5 via CloudMQTT, I want to add 2 unfortunately the result is still 5.
I send 5 via CloudMQTT, I want to add 2 unfortunately the result is still 5.
Re: MQTT Import and EasyFormula
Always state your built version.
Issue confirmed on v2.0.0-dev10
Regards,
Issue confirmed on v2.0.0-dev10
Regards,
Re: MQTT Import and EasyFormula
ESPEasy_v2.0.0-dev12
- grovkillen
- Core team member
- Posts: 3621
- Joined: 19 Jan 2017, 12:56
- Location: Hudiksvall, Sweden
- Contact:
Re: MQTT Import and EasyFormula
Please add a new issue on GitHub.
ESP Easy Flasher [flash tool and wifi setup at flash time]
ESP Easy Webdumper [easy screendumping of your units]
ESP Easy Netscan [find units]
Official shop: https://firstbyte.shop/
Sponsor ESP Easy, we need you
ESP Easy Webdumper [easy screendumping of your units]
ESP Easy Netscan [find units]
Official shop: https://firstbyte.shop/
Sponsor ESP Easy, we need you
Re: MQTT Import and EasyFormula
Where should %value% come from?
What is its input?
Normally, you should include the devicename and parameter name, but what should you expect?
I guess it should be something like the temperature reported via the MQTT sender, but where do you define what value to use?
I would expect something like "%TEMP%+2"
What is its input?
Normally, you should include the devicename and parameter name, but what should you expect?
I guess it should be something like the temperature reported via the MQTT sender, but where do you define what value to use?
I would expect something like "%TEMP%+2"
Re: MQTT Import and EasyFormula
%value% is from https://customer.cloudmqtt.com/instance for test I send numbers 5, 4, -5...
I test %TEMP%-100 and not working.
I am doing this because MQTT Import cannot take a negative value, for example -5. I was hoping to add 100 somewhere, and here I will subtract 100 and I can only send positive values. Unfortunately, mathematical calculations do not work.
I test %TEMP%-100 and not working.
I am doing this because MQTT Import cannot take a negative value, for example -5. I was hoping to add 100 somewhere, and here I will subtract 100 and I can only send positive values. Unfortunately, mathematical calculations do not work.
Re: MQTT Import and EasyFormula
Don't worry, with that speed at the moment all bugs will be fixed until 2050.... or not....
Re: MQTT Import and EasyFormula
Well bugs are fixed quite fast at the moment, only problem is "you" -users who find bugs- outnumber the bugfixers
And Christmas holidays are coming, which hopefully gives a bit more spare time to program
Who is online
Users browsing this forum: No registered users and 101 guests