######2018-04-13######
#######0.00.025#######
######FLASH INFO######
BIN file: ESP_Easy_mega-20180413_normal_ESP8266_4096.bin
COM port: (COM3) USB-SERIAL CH340
Baud rate: 115200
######POST FLASH######
No post flash information entered...
######FLASH LOG######
[esptool.exe -vv -cd nodemcu -cb 115200 -cp COM3 -ca 0x00000 -cf "C:\Users\séverine\Downloads\BIN\ESP_Easy_mega-20180413_normal_ESP8266_4096.bin"]
[13/04/2018 20:09:29] esptool v0.4.12 - (c) 2014 Ch. Klippel <
ck@atelier-klippel.de>
[13/04/2018 20:09:29] setting board to nodemcu
[13/04/2018 20:09:29] setting baudrate from 115200 to 115200
[13/04/2018 20:09:29] setting port from to COM3
[13/04/2018 20:09:29] setting address from 0x00000000 to 0x00000000
[13/04/2018 20:09:29] espcomm_upload_file
[13/04/2018 20:09:29] espcomm_upload_mem
[13/04/2018 20:09:29] setting serial port timeouts to 1000 ms
[13/04/2018 20:09:29] opening bootloader
[13/04/2018 20:09:29] resetting board
[13/04/2018 20:09:29] trying to connect
[13/04/2018 20:09:29] flush start
[13/04/2018 20:09:29] setting serial port timeouts to 1 ms
[13/04/2018 20:09:29] setting serial port timeouts to 1000 ms
[13/04/2018 20:09:29] flush complete
[13/04/2018 20:09:29] espcomm_send_command: sending command header
[13/04/2018 20:09:29] espcomm_send_command: sending command payload
[13/04/2018 20:09:29] read 0, requested 1
[13/04/2018 20:09:29] trying to connect
[13/04/2018 20:09:29] flush start
[13/04/2018 20:09:29] setting serial port timeouts to 1 ms
[13/04/2018 20:09:29] setting serial port timeouts to 1000 ms
[13/04/2018 20:09:29] flush complete
[13/04/2018 20:09:29] espcomm_send_command: sending command header
[13/04/2018 20:09:29] espcomm_send_command: sending command payload
[13/04/2018 20:09:29] espcomm_send_command: receiving 2 bytes of data
[13/04/2018 20:09:29] espcomm_send_command: receiving 2 bytes of data
[13/04/2018 20:09:29] espcomm_send_command: receiving 2 bytes of data
[13/04/2018 20:09:29] espcomm_send_command: receiving 2 bytes of data
[13/04/2018 20:09:29] espcomm_send_command: receiving 2 bytes of data
[13/04/2018 20:09:29] espcomm_send_command: receiving 2 bytes of data
[13/04/2018 20:09:29] espcomm_send_command: receiving 2 bytes of data
[13/04/2018 20:09:29] espcomm_send_command: receiving 2 bytes of data
[13/04/2018 20:09:29] Uploading 666736 bytes from C:\Users\séverine\Downloads\BIN\ESP_Easy_mega-20180413_normal_ESP8266_4096.bin to flash at 0x00000000
[13/04/2018 20:09:29] erasing flash
[13/04/2018 20:09:29] size: 0a2c70 address: 000000
[13/04/2018 20:09:29] first_sector_index: 0
[13/04/2018 20:09:29] total_sector_count: 163
[13/04/2018 20:09:29] head_sector_count: 16
[13/04/2018 20:09:29] adjusted_sector_count: 147
[13/04/2018 20:09:29] erase_size: 093000
[13/04/2018 20:09:29] espcomm_send_command: sending command header
[13/04/2018 20:09:29] espcomm_send_command: sending command payload
[13/04/2018 20:09:29] setting serial port timeouts to 15000 ms
[13/04/2018 20:09:29] setting serial port timeouts to 1000 ms
[13/04/2018 20:09:29] espcomm_send_command: receiving 2 bytes of data
[13/04/2018 20:09:29] writing flash
[13/04/2018 20:09:37] ................................................................................ [ 12% ]
[13/04/2018 20:09:45] ................................................................................ [ 24% ]
[13/04/2018 20:09:53] ................................................................................ [ 36% ]
[13/04/2018 20:10:01] ................................................................................ [ 49% ]
[13/04/2018 20:10:09] ................................................................................ [ 61% ]
[13/04/2018 20:10:17] ................................................................................ [ 73% ]
[13/04/2018 20:10:25] ................................................................................ [ 85% ]
[13/04/2018 20:10:33] ................................................................................ [ 98% ]
[13/04/2018 20:10:34] ............ [ 100% ]
[13/04/2018 20:10:34] starting app without reboot
[13/04/2018 20:10:34] espcomm_send_command: sending command header
[13/04/2018 20:10:34] espcomm_send_command: sending command payload
[13/04/2018 20:10:34] espcomm_send_command: receiving 2 bytes of data
[13/04/2018 20:10:34] closing bootloader
[13/04/2018 20:10:34] flush start
[13/04/2018 20:10:34] setting serial port timeouts to 1 ms
[13/04/2018 20:10:34] setting serial port timeouts to 1000 ms
[13/04/2018 20:10:34] flush complete
[2018-04-13 20:10:34] DONE!
############################
[2018-04-13 20:10:34] JOB COMPLETED, over and out!