newbie 18b20 code practise

Moderators: grovkillen, Stuntteam, TD-er

Post Reply
Message
Author
asuz
Normal user
Posts: 175
Joined: 31 Oct 2018, 18:22

newbie 18b20 code practise

#1 Post by asuz » 01 Nov 2018, 14:09

I am very new at ESP Easy and trying to learn codes. I try to apply some codes about turn the relay on if temperature is upper than 25 and turn the relay off lower than 25. But cannot succeed. Is there anybody help me. Here is the esp screen
Attachments
ESP_Easy.png
ESP_Easy.png (34.64 KiB) Viewed 2149 times
Top
Domosapiens
Normal user
Posts: 307
Joined: 06 Nov 2016, 13:45

Re: newbie 18b20 code practise

#2 Post by Domosapiens » 01 Nov 2018, 15:45

Seen this ?
https://www.letscontrolit.com/wiki/inde ... velControl
30+ ESP units for production and test. Ranging from control of heating equipment, flow sensing, floor temp sensing, energy calculation, floor thermostat, water usage, to an interactive "fun box" for my grandson. Mainly Wemos D1.
Top
asuz
Normal user
Posts: 175
Joined: 31 Oct 2018, 18:22

Re: newbie 18b20 code practise

#3 Post by asuz » 05 Nov 2018, 09:55

Thank you, I will try :)
Top
Post Reply

Return to “ESP Easy: General Discussion”

Who is online

Users browsing this forum: No registered users and 27 guests