Problem to send RC6 Codes with IRsend
Posted: 23 Feb 2019, 18:09
Hello,
I tried to send RC6 IR-Codes with the IRsend function.
I used: "irsend,RC6,C8052800C,36" but the output, monitored with the Arduino IRrecvDumpV2.ino shows this:
I Use the ESPEasy version: mega-20190215
Ohter Codes as example RC5 or NEC works fine.
That looks for me as an Error in the send-function
I tried to send RC6 IR-Codes with the IRsend function.
I used: "irsend,RC6,C8052800C,36" but the output, monitored with the Arduino IRrecvDumpV2.ino shows this:
Code: Select all
Timestamp : 003785.631
Encoding : RC6
Code : 2800C (20 bits)
Library : v2.5.5
Raw Timing[37]:
+ 2566, - 906, + 442, - 922, + 448, - 460, + 900, - 1338,
+ 1350, - 900, + 448, - 450, + 442, - 450, + 442, - 458,
+ 454, - 454, + 448, - 448, + 454, - 440, + 452, - 448,
+ 454, - 444, + 448, - 452, + 450, - 456, + 892, - 452,
+ 450, - 898, + 450, - 458, + 456
uint16_t rawData[37] = {2566, 906, 442, 922, 448, 460, 900, 1338, 1350, 900, 448, 450, 442, 450, 442, 458, 454, 454, 448, 448, 454, 440, 452, 448, 454, 444, 448, 452, 450, 456, 892, 452, 450, 898, 450, 458, 456}; // RC6 2800C
uint32_t address = 0x280;
uint32_t command = 0xC;
uint64_t data = 0x2800C;
Ohter Codes as example RC5 or NEC works fine.
That looks for me as an Error in the send-function