Hello,
Can somebody explain what is the action of clicking the "Use Save Button" in the switch device.
I discover with 3 Sonoff 4 CH Pro a strange behaviour :
- All have the same firmware : ESP_Easy_mega-20181220_normal_ESP8285_1024.bin
- All have the same rules
- All have the same devices
Fisrt is working OK
Second reset the outputs 1 to 4 after 4 to 10 seconds to low
Third reset only the ouputs 1 to 2 after same time
I tried to erase all the firmware by loading a blank 1 Mb file no results
Finally I clicked the "Use Save button" and the problem is solved except that the reaction on the input is slower
Patou
"Use Save button" in input device ?
Moderators: grovkillen, Stuntteam, TD-er
Re: "Use Save button" in input device ?
The Switch Device "Use Safe Button (slower)" feature changes the switch's input sampling from 100mS to 200mS. It is a simple contact debounce.
- Thomas
- Thomas
Re: "Use Save button" in input device ?
Thanks for the info
Who is online
Users browsing this forum: No registered users and 93 guests