Hello all ,
i do try to get up to 3 SHT10 sensors to work.
At the moment 2 are connected like the screenshot will show.
both sensors show nearly same data.
But pysical the are 20 meters apart.
One is groundlevel, one is up in the roof.
With mx external temprature device i get 24 degree up in the roof and about 17.5 degree for groundlevel.
so i did use seperate gpio pins for each sensors.
common clock wire was not working out for me.
So did i something wrong here or is there a bug ?
Thanks for your help !!!
Sascha
Multiple SHT10 Sensors
Moderators: grovkillen, Stuntteam, TD-er
- Sasch600xt
- Normal user
- Posts: 164
- Joined: 10 Sep 2018, 16:37
Multiple SHT10 Sensors
- Attachments
-
- Screenshot 2019-03-25 15.02.58.png (120.98 KiB) Viewed 1509 times
"the flat earth society has members all around the globe"
- Sasch600xt
- Normal user
- Posts: 164
- Joined: 10 Sep 2018, 16:37
Re: Multiple SHT10 Sensors
ok,
seems like common clock is working.
but still it looks like i only get data of one sensor.
i made temp different of 20 degree now for the sensors.
But i only get data of sensor "Unten" which somehow mirrors it data to sensor "Oben" ?
seems like common clock is working.
but still it looks like i only get data of one sensor.
i made temp different of 20 degree now for the sensors.
But i only get data of sensor "Unten" which somehow mirrors it data to sensor "Oben" ?
- Attachments
-
- Screenshot 2019-03-25 16.02.31.png (126.38 KiB) Viewed 1495 times
"the flat earth society has members all around the globe"
Who is online
Users browsing this forum: No registered users and 22 guests