I try to compile ESPEasy with the Arduino IDE, following the instruction on the Let`s Control page.
Using Arduino 1.6.13 with ESP board libary 2.3.0 an ESPEasy_mega-20190607.
While compiling i get the error:
arduino-1.6.12P230\Portable\sketchbook\ESPEasy\Networking.ino:10:25: fatal error: lwip/etharp.h: No such file or directory
I could not find any help in the formu for this.
Thanks for your help.
promblems in compiling ESPEasy
Moderators: grovkillen, Stuntteam, TD-er
Re: promblems in compiling ESPEasy
Ist there no one who could help me ?
Re: promblems in compiling ESPEasy
That part should now be fixed. I merged it yesterday: https://github.com/letscontrolit/ESPEas ... f38b936097thomaskl wrote: ↑29 Jun 2019, 19:50 I try to compile ESPEasy with the Arduino IDE, following the instruction on the Let`s Control page.
Using Arduino 1.6.13 with ESP board libary 2.3.0 an ESPEasy_mega-20190607.
While compiling i get the error:
arduino-1.6.12P230\Portable\sketchbook\ESPEasy\Networking.ino:10:25: fatal error: lwip/etharp.h: No such file or directory
I could not find any help in the formu for this.
Thanks for your help.
But building on core 2.3.0 is not going to work.
I've been working on that a few months ago and was not able to do so myself.
Yesterday I also tested core 2.4.0 and managed to build a version, but as soon as it was flashed to a node, it crashed immediately.
At this moment the oldest core version supported is core 2.4.1, but I strongly suggest to go for core 2.5.2
Who is online
Users browsing this forum: No registered users and 91 guests