Newbeee - wants to use ESP Easy on a sailing boat

Moderators: grovkillen, Stuntteam, TD-er

Post Reply
Message
Author
zuchi238
Normal user
Posts: 2
Joined: 05 Dec 2019, 22:20

Newbeee - wants to use ESP Easy on a sailing boat

#1 Post by zuchi238 » 05 Dec 2019, 22:26

Hi,

Some facts:
- Got my hands on ESP8266 D1 mini
- Understand Arduino a bit but read about ESP Easy, thought it would be easier to connect to Raspi (incl Openplotter) on my boat.
- Found out how to flash and was able to flash my D1
- But now I can not find the AP Wifi to finish the configuration (=connect to my home Wifi)
- ;(

Do not know where to start, as I have re-flashed the card 4 times by now.

Hope anybody (much smarter) can briefly use his brainpower and put me on a "fixit" path.

Thanks,

Bart

zuchi238
Normal user
Posts: 2
Joined: 05 Dec 2019, 22:20

Re: Newbeee - wants to use ESP Easy on a sailing boat

#2 Post by zuchi238 » 06 Dec 2019, 08:33

Anybody smarter then me out there who could help?

Bart

Flying Domotic
Normal user
Posts: 36
Joined: 27 Aug 2019, 23:57

Re: Newbeee - wants to use ESP Easy on a sailing boat

#3 Post by Flying Domotic » 06 Dec 2019, 10:05

Hi!
You normally should see some new AP starting with ESPxxxx. Is this the case?
You may also want to have minimum debug connecting to USB port with e terminal (either with Arduino IDE, Platform IO or any terminal like Putty). I'm pretty sure that knowing that's happen inside will help debug.
Hope this helps,

TD-er
Core team member
Posts: 2115
Joined: 01 Sep 2017, 22:13
Location: the Netherlands
Contact:

Re: Newbeee - wants to use ESP Easy on a sailing boat

#4 Post by TD-er » 06 Dec 2019, 14:39

The included flasher may also help in setting the WiFi credentials via commands sent over the serial port.

Post Reply

Who is online

Users browsing this forum: No registered users and 16 guests