I do have 2 dallas sensors on 1 gpio....
When i try a third one, my eps stop working..
In my mind there was no limit to the dallassensors....
I do have 1 resistor between this sensors.
Is there a option for more sensors on 1 pin?
Max dallas
Moderators: grovkillen, Stuntteam, TD-er
Re: Max dallas
What dallas is it?
If its a 1-Wire then use google to find out how to connect more.
If its a 1-Wire then use google to find out how to connect more.
5xESP-01 - 3xESP-12 - 2xESP-12E 3xRPIb+ - 1xBPIm1 - 3xACTi DOME - 7xACTi Indoor cam. Lot off cisco equ.
Re: Max dallas
Maybe here's more information for you how to connect the Dallas DS18B20
https://openenergymonitor.org/emon/buil ... re-sensing
or
http://gejanssen.com/howto/raspberrypi/index.html
https://openenergymonitor.org/emon/buil ... re-sensing
or
http://gejanssen.com/howto/raspberrypi/index.html
- Attachments
-
- DS18B20.JPG (76.3 KiB) Viewed 6052 times
Re: Max dallas
Thanks all...
Sorry for my real stupidity ..
Instead of a Dallas, I had to come out with a loupe that I step down regulater had tied.
They are very similar.
stupid stupid ..
And tjsa age ...
Sorry for my real stupidity ..
Instead of a Dallas, I had to come out with a loupe that I step down regulater had tied.
They are very similar.
stupid stupid ..
And tjsa age ...
Who is online
Users browsing this forum: Bing [Bot] and 38 guests