SONOFF TOUCH - Did you see it?

Moderators: grovkillen, Stuntteam, TD-er

Post Reply
Message
Author
ayasystems
Normal user
Posts: 39
Joined: 09 Aug 2016, 09:45

SONOFF TOUCH - Did you see it?

#1 Post by ayasystems » 27 Nov 2016, 19:50

Another sonoff device!

https://www.itead.cc/sonoff-touch.html

https://www.youtube.com/watch?v=JdeZ7tMgeNw

Seems be based on ESP8285 with 1MB built in flash

ayasystems
Normal user
Posts: 39
Joined: 09 Aug 2016, 09:45

Re: SONOFF TOUCH - Did you see it?

#2 Post by ayasystems » 15 Dec 2016, 11:51

Nice look
WhatsApp Image 2016-12-15 at 08.48.14.jpeg
WhatsApp Image 2016-12-15 at 08.48.14.jpeg (109.53 KiB) Viewed 6599 times
WhatsApp Image 2016-12-15 at 08.47.43.jpeg
WhatsApp Image 2016-12-15 at 08.47.43.jpeg (91.69 KiB) Viewed 6599 times

timsson
Normal user
Posts: 77
Joined: 25 Mar 2016, 22:00

Re: SONOFF TOUCH - Did you see it?

#3 Post by timsson » 15 Dec 2016, 16:12

?It works with espeasy?

NietGiftig
Normal user
Posts: 103
Joined: 16 Sep 2015, 20:32

Re: SONOFF TOUCH - Did you see it?

#4 Post by NietGiftig » 15 Dec 2016, 16:19

timsson wrote:?It works with espeasy?
What you mean?
Out of the box?
Of course not

timsson
Normal user
Posts: 77
Joined: 25 Mar 2016, 22:00

Re: SONOFF TOUCH - Did you see it?

#5 Post by timsson » 15 Dec 2016, 18:07

... Can i flash easyesp by my self? Do you have a pinout (TX,RX,GND,Vin,Gpio0) or a picture from inside?
Thanks

ayasystems
Normal user
Posts: 39
Joined: 09 Aug 2016, 09:45

Re: SONOFF TOUCH - Did you see it?

#6 Post by ayasystems » 15 Dec 2016, 23:07

Yes, it is based on ESP family
sonoff_touch.jpg
sonoff_touch.jpg (122.73 KiB) Viewed 6524 times

timsson
Normal user
Posts: 77
Joined: 25 Mar 2016, 22:00

Re: SONOFF TOUCH - Did you see it?

#7 Post by timsson » 15 Dec 2016, 23:39

Thanks! :D

m.klinge
Normal user
Posts: 12
Joined: 10 Jan 2017, 20:19

Re: SONOFF TOUCH - Did you see it?

#8 Post by m.klinge » 10 Jan 2017, 21:49

Has anybody been able to flash esp easy onto this? :-)

/M

ayasystems
Normal user
Posts: 39
Joined: 09 Aug 2016, 09:45

Re: SONOFF TOUCH - Did you see it?

#9 Post by ayasystems » 11 Jan 2017, 07:27

Yes! I flashed

Works fine¡

m.klinge
Normal user
Posts: 12
Joined: 10 Jan 2017, 20:19

Re: SONOFF TOUCH - Did you see it?

#10 Post by m.klinge » 11 Jan 2017, 08:33

ayasystems wrote:Yes! I flashed

Works fine¡
Cool - did you do anything other than solder the pins and connect to the FTDI?

//M
Last edited by m.klinge on 11 Jan 2017, 10:53, edited 1 time in total.

ayasystems
Normal user
Posts: 39
Joined: 09 Aug 2016, 09:45

Re: SONOFF TOUCH - Did you see it?

#11 Post by ayasystems » 11 Jan 2017, 09:17

You need solder wire to gpio 0 in order to enter in flash mode and setup as esp8265 (I don't remember exactly but it is not a esp8266)

m.klinge
Normal user
Posts: 12
Joined: 10 Jan 2017, 20:19

Re: SONOFF TOUCH - Did you see it?

#12 Post by m.klinge » 11 Jan 2017, 10:54

ayasystems wrote:You need solder wire to gpio 0 in order to enter in flash mode and setup as esp8265 (I don't remember exactly but it is not a esp8266)
Ok but that's the only difference?

//M

ayasystems
Normal user
Posts: 39
Joined: 09 Aug 2016, 09:45

Re: SONOFF TOUCH - Did you see it?

#13 Post by ayasystems » 11 Jan 2017, 11:30

Nothing else. Works very fine!

m.klinge
Normal user
Posts: 12
Joined: 10 Jan 2017, 20:19

Re: SONOFF TOUCH - Did you see it?

#14 Post by m.klinge » 11 Jan 2017, 11:44

ayasystems wrote:Nothing else. Works very fine!
Good to know - I'm considering to install a few of them. Being integrated and working "like normal" has a huge WAF factor in our house :-D

//M

ayasystems
Normal user
Posts: 39
Joined: 09 Aug 2016, 09:45

Re: SONOFF TOUCH - Did you see it?

#15 Post by ayasystems » 11 Jan 2017, 11:49

Is not possible use it in place/zones with two or more walls/switchs in the line because it has only ON OFF dont do conmutation

Has two leds connected to a diferents gpio and the relay

I hope you understand my poor english

m.klinge
Normal user
Posts: 12
Joined: 10 Jan 2017, 20:19

Re: SONOFF TOUCH - Did you see it?

#16 Post by m.klinge » 11 Jan 2017, 12:47

ayasystems wrote:Is not possible use it in place/zones with two or more walls/switchs in the line because it has only ON OFF dont do conmutation

Has two leds connected to a diferents gpio and the relay

I hope you understand my poor english
Du you mean like this:
Image

Or like this:
Image

//M

m.klinge
Normal user
Posts: 12
Joined: 10 Jan 2017, 20:19

Re: SONOFF TOUCH - Did you see it?

#17 Post by m.klinge » 11 Jan 2017, 12:49

Or like this:
Image

//M

ayasystems
Normal user
Posts: 39
Joined: 09 Aug 2016, 09:45

Re: SONOFF TOUCH - Did you see it?

#18 Post by ayasystems » 11 Jan 2017, 13:41

Two switch to operate one line. In two diferent points of the room...

m.klinge
Normal user
Posts: 12
Joined: 10 Jan 2017, 20:19

Re: SONOFF TOUCH - Did you see it?

#19 Post by m.klinge » 11 Jan 2017, 14:57

ayasystems wrote:Two switch to operate one line. In two diferent points of the room...
Ahh ok - I guess that could be handled by the software by setting a rule for Switch1 to trigger Switch2?

But good to know - I only have that setup in one room in my house :)

//M

User avatar
ManS-H
Normal user
Posts: 234
Joined: 27 Dec 2015, 11:26
Location: the Netherlands

Re: SONOFF TOUCH - Did you see it?

#20 Post by ManS-H » 11 Jan 2017, 17:12

ayasystems wrote:Another sonoff device!

https://www.itead.cc/sonoff-touch.html

https://www.youtube.com/watch?v=JdeZ7tMgeNw

Seems be based on ESP8285 with 1MB built in flash
To day i received my Sonoff POW, inside was this leaflet. It shows another Touch switch the you described.
See this one also not on http://www.itead.cc
Attachments
Itead.cc leaflet.jpg
Itead.cc leaflet.jpg (98.93 KiB) Viewed 5537 times

Allycat1972
Normal user
Posts: 25
Joined: 19 Apr 2016, 11:12

Re: SONOFF TOUCH - Did you see it?

#21 Post by Allycat1972 » 16 Jan 2017, 12:20

Hi Guys,

I've been looking at these since they came out, but I live in the UK and we don't have Live and Neutral in the wall switch socket. Has anyone found a way to run these in the UK?

Regards

andrew

ryanjennings
Normal user
Posts: 9
Joined: 25 Jan 2017, 03:57

Re: SONOFF TOUCH - Did you see it?

#22 Post by ryanjennings » 25 Jan 2017, 04:02

ayasystems wrote:Nothing else. Works very fine!
I have tried to flash R120 to a touch. All seems to go fine, but when I reboot I don't ever see the AP to connect to.

Any suggestions? I have tried both 512 and 1024. I kept gpio 0 low during boot and all appears like I have had good results with on the basic sonoff modules.

Thanks for the help,
Ryan

ayasystems
Normal user
Posts: 39
Joined: 09 Aug 2016, 09:45

Re: SONOFF TOUCH - Did you see it?

#23 Post by ayasystems » 25 Jan 2017, 07:48

Did you flash a compiled download version?

Touch is not a esp8266...you need to flash with the source code as esp8265.

ryanjennings
Normal user
Posts: 9
Joined: 25 Jan 2017, 03:57

Re: SONOFF TOUCH - Did you see it?

#24 Post by ryanjennings » 25 Jan 2017, 14:47

ayasystems wrote:Did you flash a compiled download version?

Touch is not a esp8266...you need to flash with the source code as esp8265.

Oh thank you. I just used the same compiled download version of R120 I used for the sonoff relay. I thought the only difference was the onboard memory. I will give compiling a try.

It worked.

Thanks again for the quick reply,
Ryan

User avatar
toffel969
Normal user
Posts: 469
Joined: 03 Jan 2017, 10:58
Location: Germany

Re: SONOFF TOUCH - Did you see it?

#25 Post by toffel969 » 08 Feb 2017, 07:38

chip is actually a esp8285, it is like a esp8266with 1mb flash integrated (on chip). usually has an ipex connector. has slightly better deep sleep consumption
Domoticz on Raspi 2 -- 14 ESP units (hacked Sonoff,NodeMCUs, Wemos, self-built units) running with RC140- Mega 2.0.0 dev8

xbmcnut
Normal user
Posts: 49
Joined: 17 Mar 2016, 08:49
Location: Auckland, NZ
Contact:

Re: SONOFF TOUCH - Did you see it?

#26 Post by xbmcnut » 11 Feb 2017, 05:27

Did a quick video with full how to guide in the description. Enjoy. Works a treat!
https://www.youtube.com/watch?v=s5gbdy0niAs
Numerous Sonoff's and Shelly's, Home Assistant on Intel NUC i3, Aeotec Z-Stick (Gen 5), deCONZ Zigbee Stick, 3 x Echo Dot's and 5 x Google Home

drbrains
Normal user
Posts: 11
Joined: 17 Feb 2017, 16:22

Re: SONOFF TOUCH - Did you see it?

#27 Post by drbrains » 17 Feb 2017, 16:49

I found a 2 gang sonoff touch "look-a-like". It works the same with the ewelink app and it is based on the PSB-B04-GL. On the itead support site I can find the pin-out for this module. However I am not able to find the rx/tx pins to flash espeasy (or anything else) on it.

I found this module is used in other applications as well like the usb 5v, 4 ch. relay.

Anyone know how to connect tx/rx and pull GPIO 0 LOW?

psy0rz
Normal user
Posts: 232
Joined: 02 Feb 2017, 12:12

Re: SONOFF TOUCH - Did you see it?

#28 Post by psy0rz » 17 Feb 2017, 17:07

If someone has the correct esp8285 platformio.ini environment settings for me, I could add it to our travs-script.

That way there will be also an automated firmware.bin release for the esp8285 from now on. (saves a lot of people a lot of compile-hassel)

Edwin
Please support ESPEasy development via Patreon or buy us a coffee.

xbmcnut
Normal user
Posts: 49
Joined: 17 Mar 2016, 08:49
Location: Auckland, NZ
Contact:

Re: SONOFF TOUCH - Did you see it?

#29 Post by xbmcnut » 20 Feb 2017, 00:02

drbrains wrote:I found a 2 gang sonoff touch "look-a-like"
Can you provide a link to the hardware?
Numerous Sonoff's and Shelly's, Home Assistant on Intel NUC i3, Aeotec Z-Stick (Gen 5), deCONZ Zigbee Stick, 3 x Echo Dot's and 5 x Google Home

drbrains
Normal user
Posts: 11
Joined: 17 Feb 2017, 16:22

Re: SONOFF TOUCH - Did you see it?

#30 Post by drbrains » 20 Feb 2017, 04:51

xbmcnut wrote:
drbrains wrote:I found a 2 gang sonoff touch "look-a-like"
Can you provide a link to the hardware?
The box is labelled Tantech: http://tantech.taobao.com

However, I got it from the Itead webstore on Taobao. Those are non-branded. I got them flashed and working (see my other post)

xbmcnut
Normal user
Posts: 49
Joined: 17 Mar 2016, 08:49
Location: Auckland, NZ
Contact:

Re: SONOFF TOUCH - Did you see it?

#31 Post by xbmcnut » 20 Feb 2017, 08:31

drbrains wrote:I got them flashed and working (see my other post)
Thanks for that. You flashed them with Espurna though? I just tried over the weekend but had to jump through hoops under Windows with Platformio to get a Wemos flashed (five different Windows programs required). Certainly a long way from being as easy as ESPEasy, my go to firmware.
Numerous Sonoff's and Shelly's, Home Assistant on Intel NUC i3, Aeotec Z-Stick (Gen 5), deCONZ Zigbee Stick, 3 x Echo Dot's and 5 x Google Home

drbrains
Normal user
Posts: 11
Joined: 17 Feb 2017, 16:22

Re: SONOFF TOUCH - Did you see it?

#32 Post by drbrains » 20 Feb 2017, 09:21

Yes, I did flash with ESPurna cause ESPEasy does not support the extra SIL F330 chip between the switch and relay and the serial port on the ESP8266ex. Maybe someone could write a plugin like the ser2net one to talk with the F330. However since it is a wall switch in the end, all I needed was a way to talk to it without the e-we link cloud and use my own MQTT broker with Domoticz.

I am slowly replacing my older 433mhz switches which don't provide feedback when switched manually On/Off with a Wifi (esp) version. I am using ESP Easy on the SonOff S20.

xbmcnut
Normal user
Posts: 49
Joined: 17 Mar 2016, 08:49
Location: Auckland, NZ
Contact:

Re: SONOFF TOUCH - Did you see it?

#33 Post by xbmcnut » 20 Feb 2017, 09:26

drbrains wrote:I am using ESP Easy on the SonOff S20.
Thanks! Good to know. I would get some of those if they sold the multi socket version like the one on https://world.taobao.com/item/527467680727.htm#detail
Numerous Sonoff's and Shelly's, Home Assistant on Intel NUC i3, Aeotec Z-Stick (Gen 5), deCONZ Zigbee Stick, 3 x Echo Dot's and 5 x Google Home

Wavemaker
Normal user
Posts: 1
Joined: 23 Feb 2017, 15:49

Re: SONOFF TOUCH - Did you see it?

#34 Post by Wavemaker » 23 Feb 2017, 16:00

These sonoff touches suddenly make it very interesting to automate switches due to the low cost!

Personally however, I don't like very much the look of the face plate. Can somebody comment wether it is easy to replace the face plate, e.g. with one of Livolo?
Such as this one:
https://www.aliexpress.com/item/Livolo- ... 21458.html

Post Reply

Who is online

Users browsing this forum: No registered users and 9 guests