Reflashing firmware.

Moderators: grovkillen, Stuntteam, TD-er

Post Reply
Message
Author
homerruma
Normal user
Posts: 14
Joined: 21 Feb 2017, 12:48

Reflashing firmware.

#1 Post by homerruma » 21 Feb 2017, 19:57

Hello everyone
I am flasing my ESP01 and I saw him in the network as ESP_0.
After some time not see ESP_0
To check ESP01 I reflashing ESP01 the defaul AT Firmware and see device in network as ESP_F25B2A.

Image

I concluded that the correct ESP01.
The following is a flash firmware ESPEasy R120.

Image

But I do not see ESP01 in network with name ESP_0.Anyone know what's the problem?
Sory for bad english

paxi
Normal user
Posts: 121
Joined: 02 Feb 2017, 00:48
Location: Germany

Re: Reflashing firmware.

#2 Post by paxi » 21 Feb 2017, 22:21

Erm, I think you posted screenshots but there is nothing to see. Please edit your post. ;)

vorsselmansP
Normal user
Posts: 10
Joined: 20 Feb 2017, 12:08

Re: Reflashing firmware.

#3 Post by vorsselmansP » 24 Feb 2017, 10:41

I could be wrong because i'm also new with the esp here

ESP_0 will only come up if the ESP can not connect to your home network.
So when it disappears it is connected onto your home network and probably by DHCP so it is hard to figure out which IP it has got.
Unfortunatly it hasn't got a HOST Name when connected to your home network so it will not reponde to http:\\newdevice

If your ESP is still connected through serial line then open a terminal and type Settings and enter

Otherwise use AngryIPScanner to see which IP adresses are on your network
running Domoticz on a raspberry pi.
mi-light on domoticz
basic knowledge in electronics
Currently developing in python

Post Reply

Who is online

Users browsing this forum: Ahrefs [Bot] and 23 guests