Installation of ESPEasy32R20100 went without a hitch, and so far no crashes or unexpected behaviour except
ONLY GPIO 32,33,34,36,39 work as Analogue Inputs, the others can be selected, but they don't work
GPIO 4,5,12,13,14,15,16,17,18,19,21,22,23,25,26,27 work as simple relay driver pins - GPIO13 is shared with the RED LED on this board, and GPIO12 needs to be at 0V for it to boot, which rules out a lot of relay boards from using this PIN.
Thanks for getting it this far on the ESP32
Is there any place I can file a bug reports about the non working Analogue Pins? According to the AdaFruit Wiki,
GPIO 4,12,13,14,15,25,26,27 should work as Analogue Inputs - source https://learn.adafruit.com/adafruit-huz ... #esp32-faq