How to make Dew point show on display with sensor BME280?
Moderators: grovkillen, Stuntteam, TD-er
How to make Dew point show on display with sensor BME280?
Hello!
I am using SP Easy, ESP8266 with sensor BME280 and OLED SSD1306. Through the RS232 and the ESP Easy Mega LOG screen, it shows a "dew point". How to make the dew point also appear on the display (OLED SSD1306) and in the json screen?
I am using SP Easy, ESP8266 with sensor BME280 and OLED SSD1306. Through the RS232 and the ESP Easy Mega LOG screen, it shows a "dew point". How to make the dew point also appear on the display (OLED SSD1306) and in the json screen?
- Attachments
-
- COM_Termite.png (5.19 KiB) Viewed 12157 times
-
- Normal user
- Posts: 307
- Joined: 06 Nov 2016, 13:45
Re: How to make Dew point show on display with sensor BME280?
Are you aware of the Wiki?
https://www.letscontrolit.com/wiki/index.php/ESPEasy
and the OLED page?
https://www.letscontrolit.com/wiki/inde ... LEDDisplay
https://www.letscontrolit.com/wiki/index.php/ESPEasy
and the OLED page?
https://www.letscontrolit.com/wiki/inde ... LEDDisplay
30+ ESP units for production and test. Ranging from control of heating equipment, flow sensing, floor temp sensing, energy calculation, floor thermostat, water usage, to an interactive "fun box" for my grandson. Mainly Wemos D1.
Re: How to make Dew point show on display with sensor BME280?
Dew point value not presented in devices page.
- grovkillen
- Core team member
- Posts: 3621
- Joined: 19 Jan 2017, 12:56
- Location: Hudiksvall, Sweden
- Contact:
Re: How to make Dew point show on display with sensor BME280?
It's not a value to be used yet I guess. You can do this calculation via formula (example in the rules tutorial section) until it's available through the plugin.
ESP Easy Flasher [flash tool and wifi setup at flash time]
ESP Easy Webdumper [easy screendumping of your units]
ESP Easy Netscan [find units]
Official shop: https://firstbyte.shop/
Sponsor ESP Easy, we need you
ESP Easy Webdumper [easy screendumping of your units]
ESP Easy Netscan [find units]
Official shop: https://firstbyte.shop/
Sponsor ESP Easy, we need you
Re: How to make Dew point show on display with sensor BME280?
It is a value I've used internal for the BMx280 plugin.
I guess it would be nice to add it as an conversion to be used in rules.
I'm not sure whether other domotica systems can do something with it?
Domoticz does compute it within Domoticz itself.
I guess it would be nice to add it as an conversion to be used in rules.
I'm not sure whether other domotica systems can do something with it?
Domoticz does compute it within Domoticz itself.
Re: How to make Dew point show on display with sensor BME280?
Thanks for the answers!
Re: How to make Dew point show on display with sensor BME280?
I just spotted the dew point in the log too. I would also like to see it as an other value for the device.
Re: How to make Dew point show on display with sensor BME280?
Why dev point value is still not available in devices page? That would be important information in controlling air conditioning.grovkillen wrote: ↑01 Apr 2018, 22:04 It's not a value to be used yet I guess. You can do this calculation via formula (example in the rules tutorial section) until it's available through the plugin.
Re: How to make Dew point show on display with sensor BME280?
See the bottom of the system variables page (Tools => System variables)
There is an example of how you can compute the dew point using 2 variables.
There is an example of how you can compute the dew point using 2 variables.
-
- New user
- Posts: 1
- Joined: 24 Apr 2021, 21:48
Re: How to make Dew point show on display with sensor BME280?
How can I get things beak to reach / send out the dew point with a bme280 sensor? Unfortunately, only the air pressure, humidity, temperature is displayed. my attempts so far have failed.
Re: How to make Dew point show on display with sensor BME280?
Dew point(T,H):thesstozteron wrote: ↑24 Apr 2021, 21:53 How can I get things beak to reach / send out the dew point with a bme280 sensor? Unfortunately, only the air pressure, humidity, temperature is displayed. my attempts so far have failed.
Code: Select all
%c_dew_th%(18.6,67) => 12.31
%c_dew_th%([bme#T],[bme#H])
Who is online
Users browsing this forum: No registered users and 118 guests