Page 1 of 1

esp-wroom-32 0.96 OLED

Posted: 09 Feb 2019, 07:58
by alba
HI,

Sorry for my english.
I bought an ESP32 0.96 Inch OLED Display on Aliexpress. I try to install espeasy, but without success. I can not put it in flash mode. Can anyone help me?

Thank you

Re: esp-wroom-32 0.96 OLED

Posted: 09 Feb 2019, 08:00
by HeinJvR
Please attach a picture of the ESP device.

Some devices need to be put in flash mode by connecting GPIO0 to GND.

Re: esp-wroom-32 0.96 OLED

Posted: 09 Feb 2019, 08:58
by alba
I try with the EN and Boot button but it's not working.

Thanks
Sans titre.jpg
Sans titre.jpg (84.57 KiB) Viewed 6516 times

Re: esp-wroom-32 0.96 OLED

Posted: 12 Feb 2019, 07:49
by alba
I try with the GPIO 0 to ground, but it's the same.
I don't understand.

Re: esp-wroom-32 0.96 OLED

Posted: 16 Feb 2019, 08:24
by alba
Nobody can help me?

Re: esp-wroom-32 0.96 OLED

Posted: 16 Feb 2019, 10:41
by grovkillen
I don't have that unit. Sorry

Re: esp-wroom-32 0.96 OLED

Posted: 17 Feb 2019, 12:38
by RobertM
Same problem with : Wemos Lolin32
With Arduino IDE its OK .

Re: esp-wroom-32 0.96 OLED

Posted: 17 Feb 2019, 15:53
by alba
I try with ide arduino but I always have a compilation error