ESP32 CAM

Moderators: grovkillen, Stuntteam, TD-er

Post Reply
Message
Author
Grumpf
Normal user
Posts: 7
Joined: 05 May 2017, 23:45

ESP32 CAM

#1 Post by Grumpf » 18 May 2019, 17:38

Hi guys,
I started playing with those guys using the example of the manufacturer. (check attached pic)
You got a IP cam for less than 7€.
Anyone else ?
I don't know how to integrate the stream into Domoticz, the software only allows one stream at a time so it's complicated.
OTOH, this comes with face recognition.
What do you think ? :?:
Attachments
ESP32CAMexample.png
ESP32CAMexample.png (2.3 MiB) Viewed 970 times

User avatar
grovkillen
Core team member
Posts: 3140
Joined: 19 Jan 2017, 12:56
Location: Hudiksvall, Sweden
Contact:

Re: ESP32 CAM

#2 Post by grovkillen » 18 May 2019, 17:54

It's pretty impressive. Something like this will be possible in future ESP Easy versions. Maybe publish face ID etc. :)
ESP Easy Flasher [flash tool and wifi setup at flash time]
ESP Easy Webdumper [easy screendumping of your units]
ESP Easy Netscan [find units]
Official shop: https://firstbyte.shop/
Sponsor ESP Easy, we need you :idea: :idea: :idea:

User avatar
ManS-H
Normal user
Posts: 231
Joined: 27 Dec 2015, 11:26
Location: the Netherlands

Re: ESP32 CAM

#3 Post by ManS-H » 18 May 2019, 18:57

Looks good, and a nice price for the whole set.
https://www.aliexpress.com/item/ESP32-C ... 63411.html

Prutsium
Normal user
Posts: 35
Joined: 29 Mar 2018, 15:39
Location: Germany / Netherlands

Re: ESP32 CAM

#4 Post by Prutsium » 19 May 2019, 14:35

Have here also an ESP32 Cam as test and works within Domoticz.
Just add the following Cam:
IP: xxx.xxx.xxx.xxx
Port: 80
Protocol: Http
Image URL: capture?_cb=

Make sure you first have set the resolution on the web interface (for example 1024x768)
After reboot it jumps back to 320x240.

It's fun and works quite ok with Daylight but when it gets dark it's rubbish and you see why it's so cheap :)

Grumpf
Normal user
Posts: 7
Joined: 05 May 2017, 23:45

Re: ESP32 CAM

#5 Post by Grumpf » 20 May 2019, 21:04

Worked !!! Thank you immensely.

It's 9pm here and a bit dark, quality is 2MP and not really happy in darkness but hey, for 6€ you can't complain.
Attachments
2019-05-20 21_03_11-Rhea.png
2019-05-20 21_03_11-Rhea.png (157.51 KiB) Viewed 868 times
2019-05-20 21_02_36-Clipboard.png
2019-05-20 21_02_36-Clipboard.png (429.32 KiB) Viewed 868 times

Grumpf
Normal user
Posts: 7
Joined: 05 May 2017, 23:45

Re: ESP32 CAM

#6 Post by Grumpf » 22 May 2019, 19:33

I'm trying this model, received today :
https://github.com/LilyGO/ESP32-Camera

Image

Connecting to its AP (pwd 12345678) and going to 192.168.1.1 gives you a simple picture. The device came with a fish-eye lens. Quality of the picture is bad and frame-rate is 1fps. Maybe it's the example and the lens needs adjusting; dunno.




Impossible to program though, got the ....____....____ can't connect error. I've seen a workaround connecting a capacitor between EN & GND but... erm... where is that for this board ?
Attachments
2019-05-22 19_31_51-192.168.1.1.png
2019-05-22 19_31_51-192.168.1.1.png (1.05 MiB) Viewed 802 times

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests