Esp-01: easy solution tp use 3 GPIO ?

Moderators: grovkillen, Stuntteam, TD-er

Post Reply
Message
Author
tparvais
Normal user
Posts: 99
Joined: 28 Oct 2015, 23:13

Esp-01: easy solution tp use 3 GPIO ?

#1 Post by tparvais » 09 Feb 2020, 23:08

Hello

I’m recycled old,esp-01 to monitor 2 pulse counters and one ds18b20. Programmation firmware last Build is fine

I tried to use gpio 0, 2 and 3

When configuring on gpio 3 the ds18b20 or pulse counter it doesn’t not work

Is there a trick to release this port 3?

Thank’you

User avatar
budman1758
Normal user
Posts: 301
Joined: 15 Apr 2017, 05:13
Location: Riverside CA USA

Re: Esp-01: easy solution tp use 3 GPIO ?

#2 Post by budman1758 » 10 Feb 2020, 00:03

You need to disable the serial port to use GPIO 3. After that it should work.
"The glass is twice as big as it needs to be".

tparvais
Normal user
Posts: 99
Joined: 28 Oct 2015, 23:13

Re: Esp-01: easy solution tp use 3 GPIO ?

#3 Post by tparvais » 10 Feb 2020, 23:21

oh yes, I forgot that ! Thank you

Could be nice to add it ti wiki

Thomas

Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 25 guests