i have put espeasy to a shelly plug s https://shelly.cloud/shelly-plug-s/and got most of it to work
used this guide when flashed https://faulty.cloud/blog/shelly-plug-s-pinout
i used this firmware https://www.letscontrolit.com/forum/vie ... php?t=6681 only one i have found with hlw8012/bl0937 sensor in.
im not sure but i think the memory is like shelly 1 (2mb) worked with hard_Shelly_1_2M256.bin also.
Code: Select all
Energy (AC) - HLW8012/BL0937 [TESTING]
GPIO → SEL: GPIO:12
GPIO ← CF1: GPIO:14
GPIO ← CF: GPIO:5
Button GPIO:13
Relay GPIO:15
Red led light GPIO:00
Blue led light GPIO:02
would be nice if hlw8012/bl0937 is added to hard_Shelly_1_2M256.bin so it is possible to update ota .
some strange values sometimes but i´m not sure how to calibrate mostly showing around 230volt.
/Tage