WT32-ETH01

Moderators: grovkillen, Stuntteam, TD-er

Message
Author
Rub87
Normal user
Posts: 26
Joined: 29 Nov 2020, 22:28
Location: Belgium

Re: WT32-ETH01

#51 Post by Rub87 » 30 Jan 2021, 13:51

How can i attempt to resolve that?

TD-er
Core team member
Posts: 4523
Joined: 01 Sep 2017, 22:13
Location: the Netherlands
Contact:

Re: WT32-ETH01

#52 Post by TD-er » 30 Jan 2021, 14:53

Not sure, I have to look into the code for this.

Rub87
Normal user
Posts: 26
Joined: 29 Nov 2020, 22:28
Location: Belgium

Re: WT32-ETH01

#53 Post by Rub87 » 31 Jan 2021, 23:06

Code: Select all

217 : Info   : Connect to:
217 : Info   : Ethernet
218 : Info   : Eth Wifi mode: Ethernet ETH: PHY Typee: LAN8710 PHYAddr: 0 Eth Clock mode: External crystal oscillator MDC Pin: 16 MIO Pin: 17 Power Pin: -1
222 : Info   : ETH Started
4223 : Info   : ETH Connected
4224 : Info   : firstLoopConnectionsEstablished
7230 : Info   : ETH MAC: A4:CF:12:64:B3:8F IPv4: 10.0.1.44 (ESP-Easy) GW: 10.0.1.1 SN: 255.255.255.0 FULL_DUPLEX 100Mbps
seems the clock mode has to be set to External osc... :ugeek:

TD-er
Core team member
Posts: 4523
Joined: 01 Sep 2017, 22:13
Location: the Netherlands
Contact:

Re: WT32-ETH01

#54 Post by TD-er » 01 Feb 2021, 00:50

Ah, so it does have its own crystal oscillator?
Yep, then you should set it to have one external :)

Rub87
Normal user
Posts: 26
Joined: 29 Nov 2020, 22:28
Location: Belgium

Re: WT32-ETH01

#55 Post by Rub87 » 01 Feb 2021, 08:13

Yep. Just spotted it also..


The new lan8720 i put on has quite different look then old one. It is more round off whereas the old was very edgy, alot like these bga memory chips. Wasnt easy to get it on with a paint removal gun
Attachments
6FDBCAAC-9725-49F9-B6A6-7C093D6D4B26.jpeg
6FDBCAAC-9725-49F9-B6A6-7C093D6D4B26.jpeg (2.96 MiB) Viewed 1830 times
9A82A939-5364-4CB8-A70E-73AAB967446B.jpeg
9A82A939-5364-4CB8-A70E-73AAB967446B.jpeg (2.98 MiB) Viewed 1830 times

TD-er
Core team member
Posts: 4523
Joined: 01 Sep 2017, 22:13
Location: the Netherlands
Contact:

Re: WT32-ETH01

#56 Post by TD-er » 01 Feb 2021, 12:43

Wow, you removed it using a paint removal gun?

The LAN8710A does have 32 pads, while the LAN8720A has only 24 (25 if you count the GND at the bottom)
Difference between both is that the LAN8720A only supports RMII and no longer the older 4 wire version.
But since we only use that one, it doesn't matter to us.

Rub87
Normal user
Posts: 26
Joined: 29 Nov 2020, 22:28
Location: Belgium

Re: WT32-ETH01

#57 Post by Rub87 » 01 Feb 2021, 15:11

Weapon of choice 😎
Attachments
67193D76-B3C3-4EFC-A2CD-C6322B022575.jpeg
67193D76-B3C3-4EFC-A2CD-C6322B022575.jpeg (3.93 MiB) Viewed 1822 times

TD-er
Core team member
Posts: 4523
Joined: 01 Sep 2017, 22:13
Location: the Netherlands
Contact:

Re: WT32-ETH01

#58 Post by TD-er » 01 Feb 2021, 15:20

Well I don't think I can do that with such a blower myself, so respect :)

Rub87
Normal user
Posts: 26
Joined: 29 Nov 2020, 22:28
Location: Belgium

Re: WT32-ETH01

#59 Post by Rub87 » 03 Feb 2021, 11:57

Now could you aybe add the setting for the wESP32 in the code so there will also be a .bin which has directly the correct settings inside for other users that maybe also like the wESP32? despte its higher price its pretty well made thing with proper PoE power identification and galvnic isolation etc.

TD-er
Core team member
Posts: 4523
Joined: 01 Sep 2017, 22:13
Location: the Netherlands
Contact:

Re: WT32-ETH01

#60 Post by TD-er » 03 Feb 2021, 13:44

Please show me the settings you now use and I will add them.

Rub87
Normal user
Posts: 26
Joined: 29 Nov 2020, 22:28
Location: Belgium

Re: WT32-ETH01

#61 Post by Rub87 » 03 Feb 2021, 13:50

Code: Select all

 Eth Wifi mode: Ethernet ETH: PHY Typee: LAN8710 PHYAddr: 0 Eth Clock mode: External crystal oscillator MDC Pin: 16 MIO Pin: 17 Power Pin: -1  

Smotek7
Normal user
Posts: 26
Joined: 01 Aug 2020, 16:18
Location: SK

Re: WT32-ETH01

#62 Post by Smotek7 » 03 Feb 2021, 15:48

Hi,
is in the current release for ESP32 .bin which one can flasch to WT32-ETH1?
Or I need to create my own for WT32.

TD-er
Core team member
Posts: 4523
Joined: 01 Sep 2017, 22:13
Location: the Netherlands
Contact:

Re: WT32-ETH01

#63 Post by TD-er » 03 Feb 2021, 16:36

You can flash any esp32 eth build as long as your board uses LAN8710A or LAN8720A (or the tk<somewhat> board which I forgot the name)

Only thing is, you may need to configure the eth yourself by hand as we don't have a predefined "factory default" setting for it yet.

Smotek7
Normal user
Posts: 26
Joined: 01 Aug 2020, 16:18
Location: SK

Re: WT32-ETH01

#64 Post by Smotek7 » 03 Feb 2021, 22:24

Everything works.
To summarize:
Board WT32-ETH01
USB to RS232 converter
IO0 to GND
Flash: ESP_Easy_mega_20210114_normal_ESP32_4M316k_ETH-factory.bin
Connect to wifi and setting lan.
lan set.JPG
lan set.JPG (53.86 KiB) Viewed 1570 times
Disconnect IO0
Restart and the module will connect to the lan.

User avatar
enesbcs
Normal user
Posts: 572
Joined: 18 Jun 2017, 11:02
Location: Békéscsaba, Hungary
Contact:

Re: WT32-ETH01

#65 Post by enesbcs » 03 Feb 2021, 22:43

Smotek7 wrote: 03 Feb 2021, 22:24 Flash: ESP_Easy_mega_20210114_normal_ESP32_4M316k_ETH-factory.bin
Connect to wifi and setting lan.
lan set.JPG
Yes, i can confirm. :)
viewtopic.php?p=49536#p49536

User avatar
iron
Normal user
Posts: 136
Joined: 24 Sep 2016, 08:37
Location: Veria, Greece
Contact:

Re: WT32-ETH01

#66 Post by iron » 04 Feb 2021, 20:09

@TD-er perhaps it is safe to assume it is time to set a predefined setting for this ?
-D

hamster
Normal user
Posts: 62
Joined: 27 Sep 2015, 21:01
Location: UK

Re: WT32-ETH01

#67 Post by hamster » 04 Feb 2021, 21:38

I created a nice enclosure for the WT32-ETH01 + Relays
see thingiverse.. https://www.thingiverse.com/thing:4750234

TD-er
Core team member
Posts: 4523
Joined: 01 Sep 2017, 22:13
Location: the Netherlands
Contact:

Re: WT32-ETH01

#68 Post by TD-er » 04 Feb 2021, 22:35

iron wrote: 04 Feb 2021, 20:09 @TD-er perhaps it is safe to assume it is time to set a predefined setting for this ?
Yep.
Can you make an issue on Github for it, as these things on the forum as next to impossible to find back later when I'm at a computer I can actually code and compile on and the forum doesn't have a mark unread....

TD-er
Core team member
Posts: 4523
Joined: 01 Sep 2017, 22:13
Location: the Netherlands
Contact:

Re: WT32-ETH01

#69 Post by TD-er » 04 Feb 2021, 22:36

hamster wrote: 04 Feb 2021, 21:38 I created a nice enclosure for the WT32-ETH01 + Relays
see thingiverse.. https://www.thingiverse.com/thing:4750234
Nice enclosure!

Post Reply

Who is online

Users browsing this forum: No registered users and 12 guests