KY-024

Moderators: grovkillen, Stuntteam, TD-er

Post Reply
Message
Author
bloop16
New user
Posts: 7
Joined: 04 Feb 2021, 15:48

KY-024

#1 Post by bloop16 » 04 Feb 2021, 15:52

Hello Community,

Couldn't find any post about the KY-024 Hall Sensor.
My question, is it possible to set a KY-024 Hall Sensor as Device in ESPEasy?

Thanks for your help!

User avatar
Ath
Normal user
Posts: 3419
Joined: 10 Jun 2018, 12:06
Location: NL

Re: KY-024

#2 Post by Ath » 04 Feb 2021, 16:43

It can be connected as a Switch device for the digital output and/or you can connect it to the Analog input with its A0 output, but you have to take care that some ESP's only allow between 0 and 1 Volt on that input (though NodeMCU and Wemos D1 Mini's often have a voltage divider that accepts up to 3.3V).
These plugins are available in the 'normal' builds. Please use the latest, as available on Github: https://github.com/letscontrolit/ESPEasy/releases (Expand the 'Assets' link at the end of the release notes section for separate downloads for ESP8266 and ESP32).
/Ton (PayPal.me)

bloop16
New user
Posts: 7
Joined: 04 Feb 2021, 15:48

Re: KY-024

#3 Post by bloop16 » 04 Feb 2021, 20:33

Thanks for your help!
I´ve set the Sensor as an Pulse Sensor and connected D0 on the GPIO.
Works fine!

Post Reply

Who is online

Users browsing this forum: Ahrefs [Bot] and 45 guests