Buzzer tone off

Moderators: grovkillen, Stuntteam, TD-er

Post Reply
Message
Author
xxx_turbo_xxx
New user
Posts: 8
Joined: 12 May 2021, 17:01

Buzzer tone off

#1 Post by xxx_turbo_xxx » 12 May 2021, 17:11

I just made e rule whch plaes a sound via RTTTL on a buzzer board. My proble is tht after finishing the sound the buzzer plays an endless tone instead of being quiet. How can I programm the rule to do so?

Thanks for your help in advance!

TD-er
Core team member
Posts: 8643
Joined: 01 Sep 2017, 22:13
Location: the Netherlands
Contact:

Re: Buzzer tone off

#2 Post by TD-er » 12 May 2021, 17:31

Can you show your current rules?

xxx_turbo_xxx
New user
Posts: 8
Joined: 12 May 2021, 17:01

Re: Buzzer tone off

#3 Post by xxx_turbo_xxx » 12 May 2021, 18:47

Sure... This was a try. But after playing the melody there is a continious beep.

When I put the GPIO,16,1 in the en at least the sound stops but in between the melody all the brakes in between are with tone instead of silence.

On System#Boot do
rtttl,16:d=4,o=5,b=112:8a,8a,a,8a,8a,a,8a,8c6,8f.,16g,2a,8a-,8a-,8a-.,16a-,8a-,8a,8a.,16a,8a,8g,8g,8a,g,c6,P
GPIO,16,1
endon

TD-er
Core team member
Posts: 8643
Joined: 01 Sep 2017, 22:13
Location: the Netherlands
Contact:

Re: Buzzer tone off

#4 Post by TD-er » 12 May 2021, 20:11

And what if you set the gpio to "2" ?
See here for the "GPIO" command: https://espeasy.readthedocs.io/en/lates ... #p000-page

Post Reply

Who is online

Users browsing this forum: No registered users and 26 guests