Gotmy w25q32 today :-)

Moderators: grovkillen, Stuntteam, TD-er

Post Reply
Message
Author
asm7100
Normal user
Posts: 96
Joined: 13 Sep 2015, 21:45
Location: Denmark

Gotmy w25q32 today :-)

#1 Post by asm7100 » 26 Feb 2016, 17:49

In this weekend i will see if I can replace a 1MByte eeprom with a 4MByte eeprom.
5xESP-01 - 3xESP-12 - 2xESP-12E 3xRPIb+ - 1xBPIm1 - 3xACTi DOME - 7xACTi Indoor cam. Lot off cisco equ.
Top
User avatar
costo
Normal user
Posts: 500
Joined: 21 Nov 2015, 15:03
Location: NL, zw-NB

Re: Gotmy w25q32 today :-)

#2 Post by costo » 26 Feb 2016, 18:26

You do this mod ? http://smarpl.com/content/esp8266-esp-2 ... and-gpio10

Very easy to do when the flash chip is removed, it makes GPIO9 and GPIO10 fully usable, disconnects them from the flash chip.
Top
asm7100
Normal user
Posts: 96
Joined: 13 Sep 2015, 21:45
Location: Denmark

Re: Gotmy w25q32 today :-)

#3 Post by asm7100 » 26 Feb 2016, 20:26

No just want to upgrade the EEProm to 4MByte :-)
5xESP-01 - 3xESP-12 - 2xESP-12E 3xRPIb+ - 1xBPIm1 - 3xACTi DOME - 7xACTi Indoor cam. Lot off cisco equ.
Top
User avatar
costo
Normal user
Posts: 500
Joined: 21 Nov 2015, 15:03
Location: NL, zw-NB

Re: Gotmy w25q32 today :-)

#4 Post by costo » 26 Feb 2016, 22:36

asm7100 wrote:No just want to upgrade the EEProm to 4MByte :-)
It is real easy, bend two pins up so they are not soldered to the board and connect them with a wire to Vcc. The only thing you have to check is that you compile with the option DIO and not QIO. You do not have to cut any board traces.
Top
asm7100
Normal user
Posts: 96
Joined: 13 Sep 2015, 21:45
Location: Denmark

Re: Gotmy w25q32 today :-)

#5 Post by asm7100 » 28 Feb 2016, 08:13

Only need more space not more pins :-)
5xESP-01 - 3xESP-12 - 2xESP-12E 3xRPIb+ - 1xBPIm1 - 3xACTi DOME - 7xACTi Indoor cam. Lot off cisco equ.
Top
Post Reply

Return to “ESP Easy: Hardware”

Who is online

Users browsing this forum: No registered users and 31 guests