Error with Switch input

Moderators: grovkillen, Stuntteam, TD-er

Post Reply
Message
Author
asm7100
Normal user
Posts: 96
Joined: 13 Sep 2015, 21:45
Location: Denmark

Error with Switch input

#1 Post by asm7100 » 13 Oct 2015, 13:23

It's seems like some problems with Switch input.

I connectet one to Gnd and the other to gpio16 when the wire break the door is open.
It's market as Pull UP.
and Switch Button Type: Push Button Active low.

Bout it dosen's seem to work.
5xESP-01 - 3xESP-12 - 2xESP-12E 3xRPIb+ - 1xBPIm1 - 3xACTi DOME - 7xACTi Indoor cam. Lot off cisco equ.
Top
Martinus

Re: Error with Switch input

#2 Post by Martinus » 13 Oct 2015, 14:25

I think the GPIO-16 pin is the only one without pull up support.
Top
Post Reply

Return to “ESP Easy: Software”

Who is online

Users browsing this forum: No registered users and 114 guests