Hi, I'm experienceing some "strange" behavior but could be it's normal and I've never realized until today...
After ESPEasy boot the "On System#Boot do" is executed almost immediately after WiFi and Controller connection which is fine.
The strange thing is that after the above rule is executed, it takes almost 20 seconds before the other rules based on events are actually triggering any action.
I'm not sure if t ESPEasy boot/initialization shoudl take that long, but after this then Events works as they shoudl with perfect timing.
Is it normal this long waiting time at boot or shoudl I need to debug heavily to understand why it happens to mu modules?
Event after BOOT
Moderators: grovkillen, Stuntteam, TD-er
Event after BOOT
My TINDIE Store where you can find all ESP8266 boards I manufacture --> https://www.tindie.com/stores/GiovanniCas/
My Wiki Project page with self-made PCB/devices --> https://www.letscontrolit.com/wiki/inde ... :Papperone
My Wiki Project page with self-made PCB/devices --> https://www.letscontrolit.com/wiki/inde ... :Papperone
Who is online
Users browsing this forum: No registered users and 46 guests