values in device tab not changing?
Posted: 14 Sep 2018, 00:45
Hi
hw:nodemcu v3
fw: GIT version: mega-20180903
Setup: simple mqtt topic to turn on blue led in nodemcu. Works good, I can send a mqtt topic to turn the led on or off, but on the GUI config under device tab, the value(green field) stay at "1" and does not change, yet every thing seems to work.:
log
93348972: EVENT: temp#Humidity=42.30
93350536: SW : GPIO 2 Set to 1
93356535: SW : GPIO 2 Set to 0
device config is just switch, normal with pull up.
Have also refresh the browser, still same, is the status show in the device tab real time?
Thanks,
Ken
hw:nodemcu v3
fw: GIT version: mega-20180903
Setup: simple mqtt topic to turn on blue led in nodemcu. Works good, I can send a mqtt topic to turn the led on or off, but on the GUI config under device tab, the value(green field) stay at "1" and does not change, yet every thing seems to work.:
log
93348972: EVENT: temp#Humidity=42.30
93350536: SW : GPIO 2 Set to 1
93356535: SW : GPIO 2 Set to 0
device config is just switch, normal with pull up.
Have also refresh the browser, still same, is the status show in the device tab real time?
Thanks,
Ken