hi,
I use "Generic - Pulse counter" device with a TCRT5000 sensor to read my water-counter.
Everything is fine but the counter register every round as two impulses. It make no difference if the "mode type" is "RISING", "FALLING" or "CHANGE". It creates always two impulses.
Every ideas?
ps. It's not a good solution to divide the value by 2 because, when the measuring wheel will stop for a while in status hi, then my result will by not right.
Thank you
Generic - Pulse counter - RISING FALLING CHANGE no difference
Moderators: grovkillen, Stuntteam, TD-er
-
- New user
- Posts: 3
- Joined: 25 Feb 2019, 13:47
-
- New user
- Posts: 3
- Joined: 25 Feb 2019, 13:47
Re: Generic - Pulse counter - RISING FALLING CHANGE no difference
I found this information viewtopic.php?f=6&t=1143&p=5429&hilit=TCRT5000#p6407. It looks like the issue is still open: https://github.com/letscontrolit/ESPEasy/issues/2366
https://github.com/letscontrolit/ESPEas ... _Pulse.ino
https://github.com/letscontrolit/ESPEas ... _Pulse.ino
Code: Select all
35 Device[++deviceCount].Number = PLUGIN_ID_003;
36 Device[deviceCount].Type = DEVICE_TYPE_SINGLE;
37 Device[deviceCount].VType = SENSOR_TYPE_SINGLE;
Who is online
Users browsing this forum: Ahrefs [Bot], Google [Bot] and 142 guests