Yes. I did an upgrade.
And disconnected the power manually during the install.
Code: Select all
on System#Wake do
On System#Boot do //When the ESP wake up, do
timerSet,1,60 //Set Timer 1 for the next event in 60 seconds
On Rules#Timer=1 do //When Timer1 expires, do
if [Wind#Wind]<20 //When Wind speed less than 20km/h, do
deepsleep,300 //Deepsleep for the next 300 seconds
timerSet,1,20 //Add 20 seconds again
Pls say to your developer:
Deepsleep is very unstable.
Energy saving....is not for a ESP8266
All 5min for 60s on is not the solution.
I think, my soluton with Modemsleep is more stable.
What's that? When the blue LED is hard blinking?
Or the 2nd LED is on?
ESP will not reboot after this.
ATM it works perfect.If it's thunderstorm is very bad
If you interested:
(my own board)